The best tip/trick/diy/diagnostic tool ever
#76
Driver School Candidate
Join Date: Oct 2013
Location: CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Was hoping for some help. I been having tranny problems so I got this tool to do a little diagnosis.
https://s3.amazonaws.com/sonnax-dev/...61E-ZIP-IN.pdf
Page 3 Figure 11 shows the outline of how our transmission works. Pictured are A761E but our A960's are identical working manner.
Two weeks ago I recorded using the Tech Stream while driving for about 2 miles. This morning I looked at my data and it showed that the SLU and Lockup Solenoid don't turn on till 5th gear for both. The chart from Sonnax shows the SLU should turn on and stay on from 2nd to 6th gears.
I have a p0761 error that keeps turning on because there is a delay of my 3-4 shift. I manually shift so this error code isn't tripped but there is a 2 second delay and harsh 3-4th.
Can someone that recorded see if their SLU turns on and when. Thanks in advance.
https://s3.amazonaws.com/sonnax-dev/...61E-ZIP-IN.pdf
Page 3 Figure 11 shows the outline of how our transmission works. Pictured are A761E but our A960's are identical working manner.
Two weeks ago I recorded using the Tech Stream while driving for about 2 miles. This morning I looked at my data and it showed that the SLU and Lockup Solenoid don't turn on till 5th gear for both. The chart from Sonnax shows the SLU should turn on and stay on from 2nd to 6th gears.
I have a p0761 error that keeps turning on because there is a delay of my 3-4 shift. I manually shift so this error code isn't tripped but there is a 2 second delay and harsh 3-4th.
Can someone that recorded see if their SLU turns on and when. Thanks in advance.
#81
Driver School Candidate
Join Date: Aug 2013
Location: Idaho
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Anyone else getting this? I'm getting this same error message as well.
#82
Lead Lap
Does anyone know, if you disable the daytime running lights with Techstream, does that keep them off completely regardless of which light position is selected on the stalk, or does it just shut them off when the stalk position is "off" but still leaves the DRL on when the stalk is set to "auto"?
#83
Received mine and downloaded to my Windows 7, will try it out this weekend. It's version 8.3. I did run it in xp sp2 compatibility mode. It also had the mini VCI driver with .pdf manuals
#84
#86
Still playing with the settings and customizations, however the health check seems very accurate for I already knew what my problem areas were, the telescoping wheel being one of them.
And yes, I turned off the annoying DRL's
Also, I did not have to leave the car running for customizing, just left the ignition on. You need to have the car running to run the healthcheck on the system.
Last edited by Marklouis; 04-10-14 at 01:39 PM.
#88
#89
Correct, as of now we don't support the 3rd gen GS because it uses Toyota's older communication protocol (btw, the Yaris uses the newer one since 2006... but the higher-end models don't. Go figure). We are looking into adding support for that older protocol though, and so far it seems possible with an ELM327 Bluetooth device. I'll let you guys know if we succeed.