Any tips for replacing front parking/city lights?
04-22-13, 07:27 PM
#1
Pole Position
Thread Starter
Any tips for replacing front parking/city lights?
One of my front parking lights is on the way out....only works half the time. I'm talking about the tiny clear bulb at the top of the inboard highbeam housing. I'm planning on swapping in Silverstars or similar, to better match the HID lowbeams. Can anyone give a quick step-by-step on getting access to these bulbs?
Last edited by MX5; 04-22-13 at 07:33 PM.
04-22-13, 08:00 PM
#2
There is a long stick that is flat u twist, stick is long and sticks out, u can kinda see where it lays by looking at the bulb and eyeing it. There is a DIY thread somewhere on this site.
04-22-13, 08:15 PM
#3
04-22-13, 08:34 PM
#4
Pole Position
Thread Starter
Awesome - thanks for the link. Not at all how I figured it would be, but looks easy enough - if I can get my fat finnies around the end of that crazy long tube.....
04-22-13, 08:44 PM
#5
Lol ya the passenger side is slightly harder but with patience it can be done. When putting them in I left the parking light on so I could guide them into the hole, u might as well do LEDs while ur at it.
04-24-13, 03:03 AM
#7
Driver School Candidate
Join Date: Apr 2013
Location: GP
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Yesterday, when swapping for Philips LED I ordered, the passenger LED fell off 
...
Removed air box, bumper cover... searched for an hour, no luck had to make a new order
...Removed air box, bumper cover... searched for an hour, no luck had to make a new order
Trending Topics
Agreed
Thread
Thread Starter
Forum
Replies
Last Post
crookedIS2
IS - 2nd Gen (2006-2013)
2
09-03-11 07:15 AM