MnGs3xx

So I went to put air in my tires because my low tire pressure light was on so after I put air in the tire the valve core was making a hiding noise and turns out its leaking from the valve core I put a brand new one in and still a slow leak it seams to be the thread and lexus quoted me a new sensor and reprogramming for over 300 any ideas on what I can do, I was thinking of put some Teflon tape or some kind of sealer on the threads to make a better seal thanks

neurocity

iTrader: (17)

http://lexus.sewellparts.com/accesso...2008/4529.html

$85 from Sewell... just go to your local Discount tire for the swap and programming.

rld14

I have a similar problem with mine, they hold air and will take air but unscrewing the cores for tire removal (deflation) isn't going to work as they're corroded.

My solution, last time I changed tires, was to drill holes in the old tires. Not your issue but it might help someone.

ibidu1

iTrader: (1)

Take it to any tire shop they sell rebuild kits.

Or you can buy them off ebay

http://www.ebay.com/itm/TIRE-PRESSUR...102a41&vxp=mtr

TriniGS

iTrader: (2)

YEp best bet is to buy one from ebay or even better buy a set.

filmteknik

Are the valve cores standard or different for TPMS?

Steve