GS - 3rd Gen (2006-2011) Discussion about the 2006+ model GS300, GS350, GS430, GS450H and GS460

3GS wheel thread

Old 10-13-09, 02:22 PM
  #121  
TWong350
Moderator

iTrader: (8)
 
TWong350's Avatar
 
Join Date: Jul 2009
Location: SoCal
Posts: 2,479
Received 3 Likes on 3 Posts
Default

Originally Posted by jul3per
i have a doubt about tire wear on my gs 430. I have 275/30r20 tires on the rear. The wheels in the back have 2inch lips. My concern is my right rear tire has been worn out. Only right rear tire. my left tire is perfectly fine. I had an alignment done on the car in April and my tires had plenty tread. I went to the Goodyear tech where i had the alignment done previously and ask him what was wrong with the alignment. Apparently, the alignment is not the problem because the alignment was perfect. Just in the ranges of what factory states. Does anyone know what could be the problem???? or has this happen to anyone?
Sounds like to me that you may have a toe in/out issue on the right/rear. Camber is not adjustable. The only thing left that comes into play is toe. Toe can be the death of a tire, more than what camber can do. How many miles did it take for the tire to get this way?
Old 10-13-09, 04:12 PM
  #122  
rominl
exclusive matchup

iTrader: (4)
 
rominl's Avatar
 
Join Date: May 2002
Location: Lovely OC
Posts: 81,670
Received 183 Likes on 142 Posts
Default

Originally Posted by TWong1200
Sounds like to me that you may have a toe in/out issue on the right/rear. Camber is not adjustable. The only thing left that comes into play is toe. Toe can be the death of a tire, more than what camber can do. How many miles did it take for the tire to get this way?
agree, that's what i was thinking too, toe setting is probably way off on the right. but then he said the goodyear tech said everything is good, so i wonder what's "good"
Old 10-13-09, 09:15 PM
  #123  
silo113
Rookie
 
silo113's Avatar
 
Join Date: May 2009
Location: CA
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
Default

fighter... I'm in agreement with #2 because that is the style I'm going with. Iforged and Symbolic have nice 3-piece 5 stars (but too expensive for me). Here are some other options:
1) Enkei (only offset is 40 w/ both 20x8.5 and 20x9.5)
2) TSW (20x10 w/ offsets 25 or 40 and 20x8.5 w/ offsets 20 or 40)
3) Lorenzo (only offset is 35 w/ both 20x8.5 and 20x9.5)

Not sure if these offsets work or not.
Attached Thumbnails 3GS wheel thread-enkei.jpg   3GS wheel thread-jarama.jpg   3GS wheel thread-lorenzo.jpg  
Old 10-15-09, 08:53 PM
  #124  
LMN_Sins
Pole Position
 
LMN_Sins's Avatar
 
Join Date: Sep 2007
Location: florida
Posts: 302
Likes: 0
Received 2 Likes on 2 Posts
Default

Amazing I never been on this post but my car apparently has, on page 2...
Old 10-16-09, 02:23 PM
  #125  
Ice350
Lexus Fanatic
iTrader: (1)
 
Ice350's Avatar
 
Join Date: Mar 2003
Location: Florida
Posts: 11,349
Received 7 Likes on 7 Posts
Default

Hey Long, your car is a star. The papparazi will always use pics of it without your permission.
Old 10-19-09, 12:05 AM
  #126  
heyitzalex
Pole Position
iTrader: (6)
 
heyitzalex's Avatar
 
Join Date: Sep 2006
Location: CA
Posts: 230
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jav@vossen
GS with Vossen VVS075 in Gloss Black (20x9 +38 and 20x10.5 +45)















What are the tire sizes on this? Looks like 245/30 and 275/30/
Old 10-29-09, 09:54 PM
  #127  
fighter
Driver School Candidate
 
fighter's Avatar
 
Join Date: Jan 2007
Location: HI
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default driv 20s

2006 GS300 RWD, Quartz Shadow Metallic
Wheel Name: Drive Moonshine 5
Size: 20x8.5
Offset" ?
Tire Size(s): Nitto NT555, 235/35/20
Suspension mods: Tanabe NF210
Pros: reasonable price for wheels and tires, ride is pretty close to stock, only 2% over stock diameter, no rubbing issues
Cons: not to many choices of tires in sizes 235/35, rim sticks out of edge of tire so no room for error on curbs
  • Like the 5 spoke design
  • Still wanted comfort but also performance and looks
  • Mild drop with NF210s but took away some wheel gap
  • Went with a non-staggered setup so that I can rotate tires
  • 235/35 instead of a 245/30 to avoid a rougher ride
Attached Thumbnails 3GS wheel thread-gsbackcorner.jpg   3GS wheel thread-gs-newrims-sunset.jpg   3GS wheel thread-gs-driv1.jpg  

Last edited by fighter; 11-15-09 at 02:51 AM.
Old 11-18-09, 06:25 AM
  #128  
JBasco20
Pole Position
iTrader: (1)
 
JBasco20's Avatar
 
Join Date: Nov 2009
Location: Louisiana
Posts: 325
Likes: 0
Received 1 Like on 1 Post
Default

im looking at running a 245-30-20 Front and 275-30-20 Rear setup on some Neeper Flow Chrome wheels... The car is at stock height and im afraid to lower the car because i dont want to screw with my warranty... is anyone running this setup on a stock height 2006 GS430?? The tires will be VREDESTEIN ULTRAC SESSANTA
Old 11-21-09, 08:02 AM
  #129  
KAYnLexi
Driver School Candidate
 
KAYnLexi's Avatar
 
Join Date: Nov 2009
Location: tx
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Hey guys! I'm a newbie to this thread and I found it while googling Lexus GS wheels. I have 4 bent wheels... (don't ask) on a '07 GS350. I HAVE to buy new wheels. It's black on black and I want something nice, classic, and something with style at the same time. BTW, i'm Female LOL. I drive to work 30 miles one way, so I would like something that is stable and can last me years. Any suggestions? I'm looking to buy this week. Any help would be greatly appreciated. I like the black wheels with chrome lip but I'm thinking that might be just a fad and may not last too long. Don't laugh at me but I was looking at some rims from Ace Alloy? I like the Passion set LOL. Is that a good choice? Yes, I sound desperate but i ned HELP! Thanks so much - k
Old 11-21-09, 10:36 AM
  #130  
TwentyTen
Lexus Champion
 
TwentyTen's Avatar
 
Join Date: Sep 2003
Location: United States
Posts: 2,196
Received 1 Like on 1 Post
Default

Originally Posted by KAYnLexi
Hey guys! I'm a newbie to this thread and I found it while googling Lexus GS wheels. I have 4 bent wheels... (don't ask) on a '07 GS350. I HAVE to buy new wheels. It's black on black and I want something nice, classic, and something with style at the same time. BTW, i'm Female LOL. I drive to work 30 miles one way, so I would like something that is stable and can last me years. Any suggestions? I'm looking to buy this week. Any help would be greatly appreciated. I like the black wheels with chrome lip but I'm thinking that might be just a fad and may not last too long. Don't laugh at me but I was looking at some rims from Ace Alloy? I like the Passion set LOL. Is that a good choice? Yes, I sound desperate but i ned HELP! Thanks so much - k
Hey K, Welcome to CL!

If you can afford the time, hold off on your purchase until you've had a chancesto do a little more homework. No good decisions are made in haste. Do you have a set of stock wheels you can put on the car until you buy aftermarket wheels?
Old 11-22-09, 12:41 PM
  #131  
KAYnLexi
Driver School Candidate
 
KAYnLexi's Avatar
 
Join Date: Nov 2009
Location: tx
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by TwentyTen
Hey K, Welcome to CL!

If you can afford the time, hold off on your purchase until you've had a chancesto do a little more homework. No good decisions are made in haste. Do you have a set of stock wheels you can put on the car until you buy aftermarket wheels?

Thanks so much for your warm welcome Twenty! The wheels that I have now are stock and they're the ones that are bent. It's drivable but it needs to be repaired so I was looking into purchasing some wheels and getting those repaired later on. If you could direct me somewhere that would be great. 20's are out of the question... I'm a baseball/football/basketball mom and I can't be rollin' around like that LOL. 18's it is.

Last edited by KAYnLexi; 11-22-09 at 12:51 PM.
Old 11-24-09, 05:13 PM
  #132  
spider_55
Driver
 
spider_55's Avatar
 
Join Date: Jun 2007
Location: Here
Posts: 103
Likes: 0
Received 0 Likes on 0 Posts
Default

Wheels: 19 x 8.5 +38 Advan KREUTZER SERIES Xi - 19 lbs
Tires: 245/35/19 Toyo Proxes T1R - 25 lbs





Old 11-24-09, 05:54 PM
  #133  
lkapimp216
Lexus Champion
iTrader: (2)
 
lkapimp216's Avatar
 
Join Date: Sep 2009
Location: md
Posts: 2,159
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by JBasco20
im looking at running a 245-30-20 Front and 275-30-20 Rear setup on some Neeper Flow Chrome wheels... The car is at stock height and im afraid to lower the car because i dont want to screw with my warranty... is anyone running this setup on a stock height 2006 GS430?? The tires will be VREDESTEIN ULTRAC SESSANTA
To have them staggered right you need a 245/30/20 fr and 285/25/20 rr the middle # is a percentage of the width of the tire so 30% of a 275 is going to be larger than 30% of a 245 the side walls on the dimensions i gave you are near identical
Old 11-24-09, 06:00 PM
  #134  
lkapimp216
Lexus Champion
iTrader: (2)
 
lkapimp216's Avatar
 
Join Date: Sep 2009
Location: md
Posts: 2,159
Likes: 0
Received 3 Likes on 3 Posts
Default

22'' asanti lowered on teins
Attached Thumbnails 3GS wheel thread-mobile-pics-113.jpg   3GS wheel thread-mobile-pics-115.jpg   3GS wheel thread-mobile-pics-112.jpg  
Old 11-27-09, 11:08 AM
  #135  
Ice350
Lexus Fanatic
iTrader: (1)
 
Ice350's Avatar
 
Join Date: Mar 2003
Location: Florida
Posts: 11,349
Received 7 Likes on 7 Posts
Default

I don't think I've previously added the newest set of wheels to this thread....don't remember adding the last set. Oh well, here's a couple shots of the MC3 Wheels. I think this is the 5th set that's been on this car. Probably won't be the last.



Thread Tools
Search this Thread
Quick Reply: 3GS wheel thread



All times are GMT -7. The time now is 05:33 PM.