When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Check it out! Fitted my SC'd GS400 with a 2nd Gen IS steering wheel!
The paddle shifters give it a MUCH more sportier feel over the up/down buttons. The wheel is slightly smaller but thicker; better feel in my opinion. Also it's great that the steering wheel controls are setup to work with my aftermarket double DIN nav once I get that installed.
<br >
Big props to my friend Pornaddict! He kicked this off on his car first and helped me out; he sourced everything as well for me. Everything works as it should (airbag, paddles, stereo controls etc).
<br >
You have a GS400 right? Was you original airbag single stage? I would assume the IS bag was two stage like the 01+ 2nd gen GS bags. Nice work, wonder what an ISF wheel would like like.
You have a GS400 right? Was you original airbag single stage? I would assume the IS bag was two stage like the 01+ 2nd gen GS bags. Nice work, wonder what an ISF wheel would like like.
Yes, it's a GS400 with single stage airbag. It doesn't matter that the IS is a two stage because I used the air bag detonator from my GS and put it into the IS wheel in front of its air bag, the bracket/bolt holes line up. It was a plug n play. There had to be some other wiring to do though for the paddle shifters. My friend did all the wiring on the wheel at his house; Nothing was done at my house except for the detonator swap, install and plug in.
The ISF wheel is cool but I think that might look too modern IMO for the 2nd gen GS.
Damn beat me to it..lol Looks nice but I agree with your take on it Roc. looks a bit outta place but still looks good.
Also, you said you're planning to use the radio buttons on the steering wheel. How did you guys get past the clock spring? What interface are you planning to use to link up your radio? I was thinking of ASWC-1 and see if I could make it work. It works great on my wife's RX.
Yes, it's a GS400 with single stage airbag. It doesn't matter that the IS is a two stage because I used the air bag detonator from my GS and put it into the IS wheel in front of its air bag, the bracket/bolt holes line up. It was a plug n play. There had to be some other wiring to do though for the paddle shifters. My friend did all the wiring on the wheel at his house; Nothing was done at my house except for the detonator swap, install and plug in.
The ISF wheel is cool but I think that might look too modern IMO for the 2nd gen GS.
Gotcha, I'm surprised that the detonator fits the bag. Good thing you had a 4 sided detonator instead of a 6 sided one like my car originally had. I had to buy a Rav 4 airbag just to get the right detonator for my 01+ bag swap.
06-07-16, 06:50 PM
2nd Gen IS steering wheel retrofit
