Need a few questions answer on front uca and iforged aeros
03-02-16, 12:00 PM
#1
Pole Position
Thread Starter
iTrader: (7)
Join Date: Feb 2007
Location: Tx
Posts: 2,265
Likes: 0
Received 0 Likes
on
0 Posts
Need a few questions answer on front uca and iforged aeros
Okie guys I don't post much anymore but I been around thr block with these cars seeing how I am on my 3rd gs lol well my 3rd is a rhd aristo but whatever.
What I need answered is about aftermarket front upper control arms. I was wondering about the spc adjustable ball joint vs the entire arm. What are yalls guys pros and cons on both?
The 2nd things is I habe a set of iforged aeros I thibk 19x8.5 and 19x10. Seeing how this company never release offsets I need to know that piece of info if anyone can help me. I am trying yo rebarrel the wheels and choose tire sizes so I can go fast
. I building my aristo hopfully to 600hp. So new next barrels will be 19x3 and 4. The rear will remain the same since it's already a 4 in barrel but the front will get a bigger lip. Anyways if anyone knows the original offsets that be great. And fyi I already Googled that info not a whole lot of info out there unless I didn't search hard enough. Anyways guys please enlighten me.
What I need answered is about aftermarket front upper control arms. I was wondering about the spc adjustable ball joint vs the entire arm. What are yalls guys pros and cons on both?
The 2nd things is I habe a set of iforged aeros I thibk 19x8.5 and 19x10. Seeing how this company never release offsets I need to know that piece of info if anyone can help me. I am trying yo rebarrel the wheels and choose tire sizes so I can go fast
. I building my aristo hopfully to 600hp. So new next barrels will be 19x3 and 4. The rear will remain the same since it's already a 4 in barrel but the front will get a bigger lip. Anyways if anyone knows the original offsets that be great. And fyi I already Googled that info not a whole lot of info out there unless I didn't search hard enough. Anyways guys please enlighten me.
03-02-16, 12:21 PM
#2
Driver
Join Date: Jan 2012
Location: Toronto, ON
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
IMO i would just replace the whole arm, seeing that you will need adjustment to get wide wheels to fit up front,
one company that comes to mind is in the link bellow:
https://serialnine.com/products/jzs1...er-control-arm
one company that comes to mind is in the link bellow:
https://serialnine.com/products/jzs1...er-control-arm
03-02-16, 12:24 PM
#3
iModerate
03-02-16, 02:09 PM
#5
iModerate
Thread
Thread Starter
Forum
Replies
Last Post