clunk at low speed?
#1
Rookie
Thread Starter
clunk at low speed?
So my front end has a noise but it has almost every thing new and factory.
It has new springs,struts,lower control arms ,lower ball joint , upper control arm assy ,outer tie rods , end links.
Two things aren't sway bar bushings , strut plates
Sway bar bushings look good and the noise is more toward driver . Also last night when I pull into the garage and turning wheel I could hear it creaking .
Lexus replaced the springs and struts but not the plates and rubber. Who would do that? Anyways I think I'm gonna change those unless anybody has another suggestion feel free to let me know.
Thanks
It has new springs,struts,lower control arms ,lower ball joint , upper control arm assy ,outer tie rods , end links.
Two things aren't sway bar bushings , strut plates
Sway bar bushings look good and the noise is more toward driver . Also last night when I pull into the garage and turning wheel I could hear it creaking .
Lexus replaced the springs and struts but not the plates and rubber. Who would do that? Anyways I think I'm gonna change those unless anybody has another suggestion feel free to let me know.
Thanks
#3
Driver School Candidate
Join Date: May 2015
Location: long island, new york
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I am having a similar problem, just looked at this thread, seems pretty promising since i just changed my front rotors/pads.
https://www.clublexus.com/forums/gs-...ing-wheel.html
https://www.clublexus.com/forums/gs-...ing-wheel.html
#5
Pole Position
#6
Rookie
Thread Starter
Rockauto.com has the KYB assy 42 a piece .
And I know people get bent out of shape when people don't get lexus parts but....some dealers don't always install factory parts . Some do and some just go to car quest or napa and charge you oem cost .
And I know people get bent out of shape when people don't get lexus parts but....some dealers don't always install factory parts . Some do and some just go to car quest or napa and charge you oem cost .
Thread
Thread Starter
Forum
Replies
Last Post
kevfeil
LS - 1st and 2nd Gen (1990-2000)
12
01-31-11 11:28 AM
McSwine
LS - 1st and 2nd Gen (1990-2000)
6
02-12-08 07:14 AM