RXGS

iTrader: (2)

So I removed the engine cover on my GS300 to clean the throttle body, and a few days later i wanted to put it back on, the problem is I can't find the bolts to secure it back down. Does anyone know what size, or where I can find four replacement ones? I've been looking, but I can't quite find them.

gsean400

Wierd. I didn't know the gs300 had 4 bolts to the engine cover. I would say try autozone or Home Depot for the replacement bolts. They shouldn't be too hard to find

ttaylor993

This sounds like something that you should look for at the salvage yard. They should be very cheap, if not free.

istundra

iTrader: (2)

i think those are standard 10MM nuts. The studs should be M6 1 pitch.

go to hardware store and you can find them 3 packs for like $1.50