When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you take apart the buttons the piece where the wires attach will work their way through the channel in the factory wheel with a little effort. Should be the same to run them through the new wheel.
If you take apart the buttons the piece where the wires attach will work their way through the channel in the factory wheel with a little effort. Should be the same to run them through the new wheel.
So, after I pop out the buttons (I assume that they would be pushed in until they click in , when assembling it ) I would need to take the buttons apart and pull out the wires and re-route them thru the channels on the new steering wheel , then assemble the buttons again .
Hopefully it would not be difficult thing to do . Thanks for the heads up
I found this thread and actually is my next project. So, first if I do not sell the car before. They asked these days in a private email that if I was selling my car? He say, I want to buy. Let's see what happens with that?