What did you do to your GS today?
#632
Driver School Candidate
Join Date: Nov 2014
Location: Georgia
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#633
I changed out my bad heater switch light bulbs with some 12v mini lamps I bought at Radio Shack. Just as bright as the OEM and at 2 for $2 it cant be beat. Also this will fit the mini green caps and will work for the green light illumination bulbs when you have the lights on as well.
#634
Driver School Candidate
Yesterday and today been working on replacing my worn out front suspension parts. So far have install new front tie rods (inner and outer), new lower ball joints, new endlinks, new lower control arm bushings and new caster arm bushings. Managed to get most of it done no problem until i bunged up one of the bolt holes for the passenger side caster arm. Going to tap it tomorrow to clean up the threads. Looking forward to see if my clunking is gone. Coilovers go on order tomorrow morning.
#636
I have it installed, but has no led turns in my car yet.
#637
Yesterday and today been working on replacing my worn out front suspension parts. So far have install new front tie rods (inner and outer), new lower ball joints, new endlinks, new lower control arm bushings and new caster arm bushings. Managed to get most of it done no problem until i bunged up one of the bolt holes for the passenger side caster arm. Going to tap it tomorrow to clean up the threads. Looking forward to see if my clunking is gone. Coilovers go on order tomorrow morning.
#640
Driver School Candidate
Changed my power steering fluid, transmission fluid and brakes (pads & rotors). Still hunting down a damn clunk in my suspension somewhere guess sway bar bushings are next with the coilovers.
#641
Driver School Candidate
Join Date: Jun 2015
Location: UK
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts