Aristo swap 00 Gs tach wire?
02-24-13, 11:53 PM
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: Ks
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Aristo swap 00 Gs tach wire?
Hello all, I searched for awhile couldn't find any info on the tach wire that needs to be ran. Can Someone please lead me in the right direction as far as what pin on the igniter to what pin on the aristo Ecu?
Thanks in advance.
Thanks in advance.
02-26-13, 01:31 AM
#3
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: Ks
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply, did your tach end up working without having to run any wires?
I'm basically done with the swap other then fabbing up a downpipe and a aluminum hard pipe charge pipe.
I have been fabricating custom downpipes, turbo manifold ect for about 8 years now, I am going to be making duplicate downpipes and hard pipe kits if anyone wants to be able to buy them for a bolt in swap and not needing to take it anywhere to have one made up, I am doing this because prior to doing my swap I searched for awhile for anyone or company's that made a downpipe and charge pipes for the SMIC so a guy could do the swap and have a downpipe that would bolt up and delet the first cat as well..
I'll post pics soon as I finish mine..
I'm basically done with the swap other then fabbing up a downpipe and a aluminum hard pipe charge pipe.
I have been fabricating custom downpipes, turbo manifold ect for about 8 years now, I am going to be making duplicate downpipes and hard pipe kits if anyone wants to be able to buy them for a bolt in swap and not needing to take it anywhere to have one made up, I am doing this because prior to doing my swap I searched for awhile for anyone or company's that made a downpipe and charge pipes for the SMIC so a guy could do the swap and have a downpipe that would bolt up and delet the first cat as well..
I'll post pics soon as I finish mine..
02-26-13, 01:39 AM
#6
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: Ks
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Upside down sorry.
Anyone have a pic of the oem PS resavoir mounting bracket?
I uses a vband clamp and some flat stock but was curious how the oem one looked
Anyone have a pic of the oem PS resavoir mounting bracket?
I uses a vband clamp and some flat stock but was curious how the oem one looked
Last edited by Lexluvr; 02-26-13 at 01:46 AM.
Trending Topics
06-11-13, 09:22 PM
#11
Yup and Im in tx....we love to share information....especially stories how we woke up in a zip code from from where we last remembered lol
Posted from Fedora 18 in the mancave
Posted from Fedora 18 in the mancave
Thread
Thread Starter
Forum
Replies
Last Post
