When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I thinking of picking up some TSX projectors and was wondering if anyone has had any experience with doing this retro fit into a GS. I searched, but could not find anything about it. I know Luxur Mods has brackets for other projectors, but not the TSX. Does anyone know what would be involved with this? Thanks.
They are kinda small for the gs headlights, may look wierd. Stick with LS series or Q45.
To answer your question you would need to cut up your reflector and epoxy or screw the projectors to that, with the bracket you just replace the reflector with the bracket and projector.
TSX will fit in the high beams. I have TSX in my high beams in my retrofit that I will be getting in the next couple of weeks. For the low beams you're going to want LS460/M45/LS430/Q45..
I'm doing FX-R retrofit. Doesn't fill the large hole but it does the job. TSX are pretty small. You can try the FX-R or BI-XENON: ACURA TL / ZKW-R lens if you can 't get the Q45 or LS430 projectors.
05-31-12, 09:25 AM
TSX retrofit
