Gs300 engine swap
#2
iModerate
#3
Driver School Candidate
Thread Starter
Join Date: Oct 2011
Location: UAE
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Because i have a GS300 and i like the car so i dont wanna sell this car and buy a GS400 just wanna put gs400 engine on it if it is possible
#4
iModerate
I some how read engine COVER - my mistake, sorry. I'm sure they can be swapped. I would not be able to tell you what is involved and how easy or hard it would be though.
#5
Driver School Candidate
Thread Starter
Join Date: Oct 2011
Location: UAE
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
#6
Lexus Champion
iTrader: (14)
Sure you just will need EVERYTHING to go with it, but it'll all bolt right in.
Most places you get a motor from will not be able to provide all the extra small stuff you need. Just an engine and harness..
I would buy a totaled gs400 so you have a full doner to work with. It will be by far the easiest way to get everything you need.
Then you can still part out some leftover parts from it, and recycle the shell for a few bucks when your done..
Most places you get a motor from will not be able to provide all the extra small stuff you need. Just an engine and harness..
I would buy a totaled gs400 so you have a full doner to work with. It will be by far the easiest way to get everything you need.
Then you can still part out some leftover parts from it, and recycle the shell for a few bucks when your done..
Thread
Thread Starter
Forum
Replies
Last Post