cinnabar GS picture
#31
Pole Position
Thread Starter
Pulled the car into the shop recently and made a few "adjustments".
And It finally stopped raining for five minuets so I grabbed a few pics at this little park near my house.
Junkton-Deli exhaust
I also adjusted my tanabe DF210 coilspring-overs to a lower setting.
And It finally stopped raining for five minuets so I grabbed a few pics at this little park near my house.
Junkton-Deli exhaust
I also adjusted my tanabe DF210 coilspring-overs to a lower setting.
#38
Pole Position
Thread Starter
This was the cheapest mod I have done. These tips were laying around the shop after being cut off some truck. They were like 16 inches long! Cut them down and were welded up by none other than my main man MDSC. I was going for a junction-produce look. Thats why I call this the junkton-deli exhaust.
Thanks....... Boring maintenance is next........ Then back to the mods........
#39
Pole Position
Thread Starter
#43
Pole Position
Thread Starter
Finally got a chance to pull my car into the shop and take care of a few details that I have been wanting to do.
I have been driving around with these big primer spots on my deck-lid for long enough. And I also wanted to do a light smoking on my tails. so I tore everything down and got busy.
Sanded down the tails.
Pretty tight getting in the paint booth.
Painting is all in the details folks.
Prepped and ready to spray.
mmmmm cinnabar
Base
Clear
Smoke
DoneFor now anyways.
I have been driving around with these big primer spots on my deck-lid for long enough. And I also wanted to do a light smoking on my tails. so I tore everything down and got busy.
Sanded down the tails.
Pretty tight getting in the paint booth.
Painting is all in the details folks.
Prepped and ready to spray.
mmmmm cinnabar
Base
Clear
Smoke
DoneFor now anyways.