simplicity

I found a set of rims that i really want and its all the way in socal. I need help about the spec of wheels if ill be able to run it with out pulling fenders. Heres the spec19x9+0 19x10-5r. Please help im planning to drive from nor cal to socal tomorrow morning.. Thank you! Btw my fronts are rolled rears are shaved.

Sonic_RC

iTrader: (15)

LOL not a chance in hell. You will need more than a roll and shave. Pulling is definitely required. Unless maybe you get some adjustable rear upper arms and really camber it. Adding negative camber through the bottom with the stock suspension will not be enough

simplicity

Yea i talked to my cousin about it he said the same thing. Thanks tho yakuza!

ALowGS

iTrader: (3)

Rather then open a new thread i am gonna just piggy back on this one. Gonne be running 19x9/10 +9 all around with 225 in the front and 245 in the rear possible a 40 series. I know rolling will be needed but do i have to pull? I am lowered right now but with 20's and a 35 series, but i am just at the top of the tire. Any thoughts?

ALowGS

iTrader: (3)

Anyone? Trying to prevent opening another thread here.

Sonic_RC

iTrader: (15)

Yes, pulling is required. Anything lower than +20 pretty much will require pulling. and go 225/40 front and 245/35 rear. this will be equal height front and rear. a 245/40 would look ridiculous. You only get 2 freebies from me :P now do your damn research

ALowGS

iTrader: (3)

ahahaha thanks Yakuza. I did search for like 2 days and everyone running rims close to those specs is on air or coils. I am not that low, not even tucking 20's. Thats why i asked