DIY clearing Yellow Fogs
#1
DIY clearing Yellow Fogs
So with the help of ****-adkt & LiCelsior I was finally able to clear my yellow fogs. As i got my car covered in Flat Black Vinyl, the yellows were not matching despite the fact that i love it. So had to clear them for 6000K Hid's.
I preheated my oven at 250* for 10 minutes. Placed one of the fogs on a baking tray and put them inside the oven.
http://www.flickr.com/photos/33635394@N07/5586398392/http://www.flickr.com/photos/33635394@N07/5586398392/ by http://www.flickr.com/people/33635394@N07/, on Flickr
Put a timer on my phone and removed them after exactly 10 minutes. I don't know why i was so precise
But okay it worked.. I used a glove since the light is burninggg hot . And used a flat head screw driver. I slid the screwdriver in corners on the top and then pushed it out in the middle. Tadaa
http://www.flickr.com/photos/33635394@N07/5586401836/http://www.flickr.com/photos/33635394@N07/5586401836/ by http://www.flickr.com/people/33635394@N07/, on Flickr
http://www.flickr.com/photos/33635394@N07/5585811827/http://www.flickr.com/photos/33635394@N07/5585811827/ by http://www.flickr.com/people/33635394@N07/, on Flickr
http://www.flickr.com/photos/33635394@N07/5585814723/http://www.flickr.com/photos/33635394@N07/5585814723/ by http://www.flickr.com/people/33635394@N07/, on Flickr
The yellow glass tube that makes the whole fog yellow was held by two Philips screws.
http://www.flickr.com/photos/33635394@N07/5586405094/http://www.flickr.com/photos/33635394@N07/5586405094/ by http://www.flickr.com/people/33635394@N07/, on Flickr
open them up and the yellow tube slides out easily.
http://www.flickr.com/photos/33635394@N07/5585809339/http://www.flickr.com/photos/33635394@N07/5585809339/ by http://www.flickr.com/people/33635394@N07/, on Flickr
http://www.flickr.com/photos/33635394@N07/5586397542/http://www.flickr.com/photos/33635394@N07/5586397542/ by http://www.flickr.com/people/33635394@N07/, on Flickr
When your done. Just put other stuff back on and slide the glass back on to the housing. Heat it up. I used my mom's hair dryer
Hope it helps
I preheated my oven at 250* for 10 minutes. Placed one of the fogs on a baking tray and put them inside the oven.
http://www.flickr.com/photos/33635394@N07/5586398392/http://www.flickr.com/photos/33635394@N07/5586398392/ by http://www.flickr.com/people/33635394@N07/, on Flickr
Put a timer on my phone and removed them after exactly 10 minutes. I don't know why i was so precise
But okay it worked.. I used a glove since the light is burninggg hot . And used a flat head screw driver. I slid the screwdriver in corners on the top and then pushed it out in the middle. Tadaa
http://www.flickr.com/photos/33635394@N07/5586401836/http://www.flickr.com/photos/33635394@N07/5586401836/ by http://www.flickr.com/people/33635394@N07/, on Flickr
http://www.flickr.com/photos/33635394@N07/5585811827/http://www.flickr.com/photos/33635394@N07/5585811827/ by http://www.flickr.com/people/33635394@N07/, on Flickr
http://www.flickr.com/photos/33635394@N07/5585814723/http://www.flickr.com/photos/33635394@N07/5585814723/ by http://www.flickr.com/people/33635394@N07/, on Flickr
The yellow glass tube that makes the whole fog yellow was held by two Philips screws.
http://www.flickr.com/photos/33635394@N07/5586405094/http://www.flickr.com/photos/33635394@N07/5586405094/ by http://www.flickr.com/people/33635394@N07/, on Flickr
open them up and the yellow tube slides out easily.
http://www.flickr.com/photos/33635394@N07/5585809339/http://www.flickr.com/photos/33635394@N07/5585809339/ by http://www.flickr.com/people/33635394@N07/, on Flickr
http://www.flickr.com/photos/33635394@N07/5586397542/http://www.flickr.com/photos/33635394@N07/5586397542/ by http://www.flickr.com/people/33635394@N07/, on Flickr
When your done. Just put other stuff back on and slide the glass back on to the housing. Heat it up. I used my mom's hair dryer
Hope it helps
Trending Topics
#11
Daily DIY
Images:
After:
To glue them together i squezed the glass on and put them in owen for like 2 min then pressed more. Worked fine.
Thanx "Sinstrex" for puttin myself to some good use
- [*]
- [*]
Images:
After:
To glue them together i squezed the glass on and put them in owen for like 2 min then pressed more. Worked fine.
Thanx "Sinstrex" for puttin myself to some good use
#14
ok good to know! but my plastic ring on the backside did melt abit will see tomorrow if the y are tight and sealed! otherwise im gona put in some silicone.