raytseng

i installed strongarms without too many problems. Have some mechanism for holding up your hood.

Be sure to have proper wrench set so you can remove your old bolt-in studs. I didn't have fancy racheting wrenches, so took me a bit longer with a small monkey wrench to get the old out.

Lineup the old before installing.
The only other note in my install, if I remember is the heads are thread-on screws, so they don't just spin freely. So if you end up needing to rotate a head 90degrees, but the sucker isn't turning; unscrew it 270 the other way instead.

marshun

i put on the strong arms about 2 months ago. so good.

no problems putting them on. stupid easy

1sWt2GS

iTrader: (6)

Gonna bite the bullet and purchase these. I'll let you all know how it goes shortly afterwards!

shmuliebz

these are the ones I got so far so good

FASTEDDY

i take it there's no difference in struts from the LS to GS models? amazon is saying they dont fit my GS

1sWt2GS

iTrader: (6)

There is a difference. the GS ones that I bought were 4536


Amazon also has an option that lets you see if the item is compatible for your car.

I should be getting these today. After I get some time to install them I'll post a review.

Jobbyson

Mine didn't come with the ball head bolt. How did you cut off the old tokia factory mounting bolt ?

raytseng

You don't. You need to return or replace the item you bought or call to get the missing part.

Agent$mith

iTrader: (2)

Strong Arms are what I put at over 1 year plus ago and going strong. No regrets.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

kamlung

iTrader: (8)

same with me