Carbon Fiber wrap Galore!!! (Lots of pics)
04-20-09, 03:22 AM
#46
Lexus Champion
iTrader: (6)
Join Date: Nov 2002
Location: Mississauga,Ontario,Canada
Posts: 3,488
Likes: 0
Received 8 Likes
on
8 Posts
It is realy easy do not worry about it , Just make sure you tape off the areas to not get it on .
Lay it flat , can't do it on the car it will drip.
mask with tape.
have all parts ready as it will dry withitn 10 minutes.
keep indoors to keep dust off.
layer with one coat and it will self level and be flat ,no drip marks will show.
let it cure for an hour and apply a 2nd then 3rd coat.
reinstall , all done , no need to add anything on top of it.
Lay it flat , can't do it on the car it will drip.
mask with tape.
have all parts ready as it will dry withitn 10 minutes.
keep indoors to keep dust off.
layer with one coat and it will self level and be flat ,no drip marks will show.
let it cure for an hour and apply a 2nd then 3rd coat.
reinstall , all done , no need to add anything on top of it.
04-20-09, 12:54 PM
#52
It is realy easy do not worry about it , Just make sure you tape off the areas to not get it on .
Lay it flat , can't do it on the car it will drip.
mask with tape.
have all parts ready as it will dry withitn 10 minutes.
keep indoors to keep dust off.
layer with one coat and it will self level and be flat ,no drip marks will show.
let it cure for an hour and apply a 2nd then 3rd coat.
reinstall , all done , no need to add anything on top of it.
Lay it flat , can't do it on the car it will drip.
mask with tape.
have all parts ready as it will dry withitn 10 minutes.
keep indoors to keep dust off.
layer with one coat and it will self level and be flat ,no drip marks will show.
let it cure for an hour and apply a 2nd then 3rd coat.
reinstall , all done , no need to add anything on top of it.
04-20-09, 09:37 PM
#58
Lexus Champion
iTrader: (6)
Join Date: Nov 2002
Location: Mississauga,Ontario,Canada
Posts: 3,488
Likes: 0
Received 8 Likes
on
8 Posts
The resi i buy is from a boat builder supplier , they stock all sorts of carbon fibre , kevlar and fibreglass as well as all the parts needed for it.
Look in the phone book for a supplier like that otherwise a hardware store will carry it in the paint section .
This looks like a simple way to get some more background as well as selling kits to make your own cf anything .
http://www.carbonmods.co.uk/Departme...-Skinning.aspx
Look in the phone book for a supplier like that otherwise a hardware store will carry it in the paint section .
This looks like a simple way to get some more background as well as selling kits to make your own cf anything .
http://www.carbonmods.co.uk/Departme...-Skinning.aspx
