Replacement clear or colored headlight Lens: Gathering interest
#1
Banned
Thread Starter
Join Date: May 2008
Location: EP, MN
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Replacement clear or colored headlight Lens: Gathering interest
Ok so here's the deal... The Sherlock Society is working on a list of new products to be introduced in the upcoming months. One of the items discussed was a replacement headlight lens. There has been quite a bit of interest from the 1st Gen GS guys and as a 2nd Gen GS owner myself you know I won't leave you guys out to dry
You would buy the lens only (so no need to pay for a new headlight housing or anything) heatgun/blow dryer your headlights open, take out the old factory lens, and install the new clear lens with the included silicon sealant and then BAM! Awesome clear headlights! Not to mention the perfect opportunity for a projector headlight conversion.
The material they will be produced out of hasn't been decided yet. The Sherlock Society doesn't mess around when it comes to quality. There are many factors that need to be considered and explored to make the best possible product. Prototypes are going to be made and combat tested (heat test, impact test, ect..) to find out which material works the best.
So for those of you with old, nasty lenses, this would be an opportunity to replace them with either a fresh, clear lens, OR a smoked, amber, blue ect. lens. You could even mix and match amber inner/smoked outer or any combination of colors!
This was offered for the 240's from Final Konnexion and dramatically changed the look of the factory headlights (at $450 for 2 LENSES, price of these would be a under $120). The Sherlock Society lenses would be professionally vacuum formed and would come with a 1 year replacement warranty.
They would be clear like:
Is this something that you guys are interested in? I'd like to make a tentative list of those interested in a set of lenses so we can see if we can get these made!
2nd Gen GS lenses:
1. Och
2. eyecon7
3. mex lex
4. GSteg
5. iGOTlexy
6. turbosw20
7. CK6Speed
8. Chrispy
9. blaise
10. lexusscturbo
11. azntalldud
12. Spyder78
13. denvergs4
14. dxb_8788
15. VIP-209
16. Euphoric
17. gsCrazy
18. Kaluna
19. GS01ROD
20. lexusondubs
21. JoelGs
22. DJSpawn00
23. rnsand6kds
24. FrankT
25. hurricane
26. FlavesLex
27. Gs430Boi
28. beez43
29. dle
30. MrExecutiv
31. LEXUS_KID
32. BklynJay
33. excluesive
34. Caoboy - Fogs
35. Kaluna
36. PHML
37. sfrhack
38. denIS200
39. Mr Jokster
40. Frankdorn
41.
You would buy the lens only (so no need to pay for a new headlight housing or anything) heatgun/blow dryer your headlights open, take out the old factory lens, and install the new clear lens with the included silicon sealant and then BAM! Awesome clear headlights! Not to mention the perfect opportunity for a projector headlight conversion.
The material they will be produced out of hasn't been decided yet. The Sherlock Society doesn't mess around when it comes to quality. There are many factors that need to be considered and explored to make the best possible product. Prototypes are going to be made and combat tested (heat test, impact test, ect..) to find out which material works the best.
So for those of you with old, nasty lenses, this would be an opportunity to replace them with either a fresh, clear lens, OR a smoked, amber, blue ect. lens. You could even mix and match amber inner/smoked outer or any combination of colors!
This was offered for the 240's from Final Konnexion and dramatically changed the look of the factory headlights (at $450 for 2 LENSES, price of these would be a under $120). The Sherlock Society lenses would be professionally vacuum formed and would come with a 1 year replacement warranty.
They would be clear like:
Is this something that you guys are interested in? I'd like to make a tentative list of those interested in a set of lenses so we can see if we can get these made!
2nd Gen GS lenses:
1. Och
2. eyecon7
3. mex lex
4. GSteg
5. iGOTlexy
6. turbosw20
7. CK6Speed
8. Chrispy
9. blaise
10. lexusscturbo
11. azntalldud
12. Spyder78
13. denvergs4
14. dxb_8788
15. VIP-209
16. Euphoric
17. gsCrazy
18. Kaluna
19. GS01ROD
20. lexusondubs
21. JoelGs
22. DJSpawn00
23. rnsand6kds
24. FrankT
25. hurricane
26. FlavesLex
27. Gs430Boi
28. beez43
29. dle
30. MrExecutiv
31. LEXUS_KID
32. BklynJay
33. excluesive
34. Caoboy - Fogs
35. Kaluna
36. PHML
37. sfrhack
38. denIS200
39. Mr Jokster
40. Frankdorn
41.
Last edited by Top Hat; 11-27-08 at 09:00 AM.
#3
Lexus Fanatic
iTrader: (3)
Speaking of headlights I have an interesting story...
I was recently having my headlight housing replaced ($325 for the larger ones, $280 for the smaller ones...or so they thought at the dealership) due to the yellowing in them. Veritek and Mike saw them at the SELOC meet. Anyway, they called me and said that the car was ready so I go up to look at them and...wham, they're chrome.
They put in the standard GS headlights, not the smoked Sport Design ones that my car is supposed to have so they are currently in the process of pulling them out and putting in the new ones. Because the Sport Designs were low volume and low production, they only sell them as the assembly which is HIDs, computers, lenses, housing, etc. They are $1,195 per SIDE since you have to buy the entire thing.
This group buy idea sounds cool. I obviously am getting new headlights, but if I wasnt I would be down.
I was recently having my headlight housing replaced ($325 for the larger ones, $280 for the smaller ones...or so they thought at the dealership) due to the yellowing in them. Veritek and Mike saw them at the SELOC meet. Anyway, they called me and said that the car was ready so I go up to look at them and...wham, they're chrome.
They put in the standard GS headlights, not the smoked Sport Design ones that my car is supposed to have so they are currently in the process of pulling them out and putting in the new ones. Because the Sport Designs were low volume and low production, they only sell them as the assembly which is HIDs, computers, lenses, housing, etc. They are $1,195 per SIDE since you have to buy the entire thing.
This group buy idea sounds cool. I obviously am getting new headlights, but if I wasnt I would be down.
#5
iModerate
This sounds interesting.
The green tint is on the housing not the lens.
The green tint is on the housing not the lens.
Trending Topics
#12
Banned
Thread Starter
Join Date: May 2008
Location: EP, MN
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Thank you chrispy for clarifying everything. The SC guys are getting the thread on this as well.
Price for these will be around $120 for all four lenses.
We are considering using 3m clear bar film over the front of the lens so when it gets nasty you peel it off and put a new one on and its fresh again! No body wants headlights with that not so fresh feeling.
Price for these will be around $120 for all four lenses.
We are considering using 3m clear bar film over the front of the lens so when it gets nasty you peel it off and put a new one on and its fresh again! No body wants headlights with that not so fresh feeling.
Last edited by Top Hat; 10-25-08 at 05:57 PM.
#14
Banned
Thread Starter
Join Date: May 2008
Location: EP, MN
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
It hasn't been decided yet. The Sherlock Society doesn't mess around when it comes to quality. There are many factors that need to be considered and explored to make the best possible product. Prototypes are going to be made and combat tested (heat test, impact test, ect..) to find out which material works the best. Everything is in the test phase, we are just gathering information to determine which products there is a demand for.