truenoboy

For you exerienced wheel guys....in the rear, will 285/30/20 tires rub wrapped on 20x9.5 +40 offset wheels, dropped on DF210 springs? I see a lot of people running 275 wheels, but if I can fit 285, I'd rather go that route.

Indio

iTrader: (1)

A +40 is probably going to rub, myself and many here have run 20x10 w/285/30/20 and it's very close with +47, for a 20x9.5 you should stick with 275/30/20, that's more than enough tire for your setup.

carbongs

iTrader: (13)

yeah it'll prob rub. i have the 285/30/20 set up but i also have shaved my fenders and i have a +37 in the rear

aristo2369

iTrader: (2)

the first set of wheels i had on the car with the rear s being 285/30/20 with 41 offset didnt rub at all. got a new set of wheels 35 offset/same tires and it rubs when i have a full tank and 3 people in the car. i was thinking of maybe going to a 265/35 or 275/35. i want to get a ticket sidewall, dont want to bend my wheels

aristo2369

iTrader: (2)

what do you have in front?
i want to put 275/35 or 265 with 245 in front but i dont want to look like a truck

truenoboy

Im curious, how wide was the rim and what springs you on?

carbongs

iTrader: (13)

i'm running 245/35/20 up front. it doesn't look like a truck at all

aristo2369

iTrader: (2)

im running Tein with electronic controller. 10.5 rears.

1GStoEnvy

iTrader: (37)

i have 285/30/20 on a 20x10.5 +29 and i rub from time to time, but its not too bad....

wowitztai

iTrader: (1)

is ur rear fender rolled or shaved tho?

1GStoEnvy

iTrader: (37)

yeah, they are....

GS430V8

thats one wide tire, 285's in the rear wow!

1GStoEnvy

iTrader: (37)

yeah, it is.... but i'm going to switch them out to 255/35/20 for the rears and 225/35/20 for the front.... i want more of a stretch look

truenoboy

Those are 285! Those tires look stretched on those wheels. Question though, I was thinking about getting those same Falken tires. I can't really tell from the picture, but does it have rim guard?

truenoboy

Just curious, which Tien? And are your fenders rolled/cut? Based on what I'm hearing so far, I think I should be able to get away with 285 on 20x9.5 +40 wheel.