Door Lock Acutuators DIY ???
#871
Driver School Candidate
Join Date: Oct 2012
Location: ca
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Your post is greatly appreciated, I need to replace 2 actuators w/closers if I can find them. Do you know of any classified having door latch/actuator w/ closers.
69charger
bryanjs@sbcglobal.net
69charger
bryanjs@sbcglobal.net
#874
The easiest way to crack open the housing is by using a safety blade and a small hammer (like a model hammer). Line the blade up straight between the two halves of the housing and slightly tap until the blade goes in. Go all around the housing until you can separate the two halves. Any other way is too much of a pain to do.
#875
Racer
iTrader: (14)
Is $70 for a whole actuator a fair price? Seems a bit much considering people are buying the motors for just $17? Or am I mistaken and it was $17 for all 4?
Also, does it make a difference if I have a Viper 5901 installed with the remote start?
Also, does it make a difference if I have a Viper 5901 installed with the remote start?
Last edited by LexusK; 10-29-12 at 03:14 PM.
#877
Advanced
#880
A new actuator is around $275 - $300 each. The motor by itself is around $6 on Ebay.
#881
Driver School Candidate
I have edited this because there has been several questions about finding these motors on EBAY. The seller's name is tag16c and if you are looking for the motors a good place to start your search is "Mabuchi" the part number that we have been using FC 280PT-22125 If you go to Mabuchi website you can also see there are several other that will work but they want you buy quantities that are high, like 10K, there only like 30 cents a piece. I have attached a picture from tag16c 's auction I do not think he would mind. When I look for the auction I start by typing in Mabuchi then look for that picture below that I posted. I hope this helps. I know that this DIY takes a lot of different turns and it can be hard to follow. I have about 10 motors as spares... I hope this helps.
I did my drivers side door lock actuator today. I took several pics. Would anyone be interested in a small write up with several pics? I would hate to invest time in a topic no one would be interested in. Any comments. Do you guys wanna see my pics? I have never done a DIY but I did it myself and it was not toooooo bad. Feedback will help motivate me. Thanks, B
I did my drivers side door lock actuator today. I took several pics. Would anyone be interested in a small write up with several pics? I would hate to invest time in a topic no one would be interested in. Any comments. Do you guys wanna see my pics? I have never done a DIY but I did it myself and it was not toooooo bad. Feedback will help motivate me. Thanks, B
#884
Driver School Candidate
Join Date: Feb 2011
Location: IL
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
door lock actuator
I had no problems getting the motor in the actuator and getting the door lock to work with inside locks, but the key fob will not lock the doors with the newly installed motor. Any suggestions would be greatly appreciated. For now I have just disconnected the passenger side door to use the key fob , otherwise it will not lock any of the doors with the newly installed motor. Anybody encountered thhis problem and a quick fix.
Thanks , bogie54
Thanks , bogie54