Supra Parts / Intake Etc Fitts A Gs300??
08-18-01, 09:17 PM
#1
Lexus Champion
Thread Starter
Join Date: Jul 2001
Location: Nevada
Posts: 1,822
Likes: 0
Received 0 Likes
on
0 Posts
would a engine parts from a toyota supra fit my gs300?? because there the exact same engine.. would a supra intake cam gears etc.. fit my gs300? its a 98
08-18-01, 09:41 PM
#3
Lexus Champion
Thread Starter
Join Date: Jul 2001
Location: Nevada
Posts: 1,822
Likes: 0
Received 0 Likes
on
0 Posts
what about supra turbos?? like if i goto a junk yard and take the twin turbos from a tt supra.. would they fit my gs??? and where do i get the turbo installing kit?? and what about tt supras intercoller??? would it fit?
08-18-01, 09:45 PM
#4
Lexus Champion
i cant answer your question for sure but it would take a lot of custom work, and you would need the new supra intake manifold too, not the intake manifold that goes over the head, it would take a lot of work though dude...
08-18-01, 11:22 PM
#5
Originally posted by MEMYSELFNMYG300
what about supra turbos?? like if i goto a junk yard and take the twin turbos from a tt supra.. would they fit my gs??? and where do i get the turbo installing kit?? and what about tt supras intercoller??? would it fit?
what about supra turbos?? like if i goto a junk yard and take the twin turbos from a tt supra.. would they fit my gs??? and where do i get the turbo installing kit?? and what about tt supras intercoller??? would it fit?
2JZ-GTE and GE engines are probably all bought by tuning shops like ToySports.
08-19-01, 03:25 PM
#6
Driver
Join Date: Feb 2001
Location: So. California
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Only one of the Supra's 2JZGTE & 2JZGE engine parts would work on the 98+ GS300, the exhaust cam gear, but replacing it with the stock one is useless. Since the 98+ GS300's are VVTi the intakes are different because the use a different type of air flow meter. I have been testing some HKS intake components for VVTi motors on my GS300 and so far so good (more on the later).
As for getting the turbos from a Supra TT, the manifold of the turbos will not bolt up the the head of the GS300. The head between the 2JZGTE and 2JZGE have different exhaust port designs and flanges.
Turbocharging a 98+ GS300 isnt impossible, just takes a bit more effort in the fuel management department versus pre 98 GS300's.
Hope that helps for now...Let me know if you have any other questions.
Will
As for getting the turbos from a Supra TT, the manifold of the turbos will not bolt up the the head of the GS300. The head between the 2JZGTE and 2JZGE have different exhaust port designs and flanges.
Turbocharging a 98+ GS300 isnt impossible, just takes a bit more effort in the fuel management department versus pre 98 GS300's.
Hope that helps for now...Let me know if you have any other questions.
Will
08-05-04, 04:38 AM
#7
Rookie
Join Date: May 2004
Location: Hawaii
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
could you take the head from a supra turbo with the stock turbos and wire it up to work? Im guessing you would need to do a lot of wiring and piping. Would that be all? I was looking at it and the 2jz-ge looks like the same as the GTE but with a different head. Any takers?
-tyler
-tyler
Thread
Thread Starter
Forum
Replies
Last Post
