FIGS

iTrader: (11)

Hi guys, gauging interest in a poly bushing applications geared towards the JZS147.

Currently we can provide the following, just wondering how much interest there is and I will get them coming.





Front LCA (both eccentric and non eccentric)
Front UCA (centered only)
Front Tension arm ( caster #2 bushing with both eccentric and non eccentric versions)
Front steering rack

Rear toe link
Rear Traction link subframe and spindle side

Rear upper Control arm
Rear LCA shock mount
Rear LCA inner mount


Rear subframe
Rear diff pinion mount

Sway bushings for OEM
30mm front sway bar bushing
24mm rear sway bushing


Rear Crossmember restraint washers, to tighted the crossmemeber mount.

Reply with items in bold or just let us know, or if you have another bushing that you want to see also chime in.
thanks, Mike

kene

iTrader: (2)

I am interested. But I think the biggest thing in this side of the forum is pricing.
This is just my opinion...I have no facts to support this.

If you don't mind, price wise what are some rough guesses?
As I have been very curious to see what a few of these may run.

flybye

I am certainly interested if the prices are FAIR

FIGS

iTrader: (11)

Prices will be reasonable and it will depend on the complexity of the bushing. Standard LCA bushing for example will be around $90 for both sides, the eccentric version around $150 because it requires a specially machined crush tube.
Just give me some feedback.
Mike

blklegend

iTrader: (1)

Can you provide estimated prices for each component and also possibly 1 or 2 package pricing.

FIGS

iTrader: (11)

Can you be more specific? I gave one example of the LCA for the front, the price varies on the complexity of the function and if it has a two sided fit, a press fit or if the material is injected into a press collar. Bushing bundles will have a discount of 5-15% depending on the number of pieces included.

If you have bushings locations in mind I can check then out and speculate on the projected pricing based on what we have already.

Thanks Mike

kene

iTrader: (2)

Those prices are not that bad at all, just activity on this side of the board is not as active as others areas. So I'm not sure how many would chime in on this deal.

FIGS

iTrader: (11)

Well, I might just start with 2 sets of each and see how it goes. If there is more interest we can go from there.

trd4life

Tein USA has a sells the complete line of JZS147 Superpro Poly bushings out of Australia I have a complete set front to back in my car. Not cheap though!

FIGS

iTrader: (11)

Yes Tein USA has been a distributor for a few years but has not been focused on the market. We are focusing on which bushings are important and also working with Superpro directly to reprice the market if something is way off. We plan on becoming a central distribution hub for SP and also using them for our own internal developments on applications they do not offer.

Johnny D

Id be interested in this

wilsonsan

me also so +1

vtec-this

iTrader: (3)

caster caster caster bushings!!!! i need them so bad VERY INTERESTED

Matador

ugh, my bushings are worn to hell... so whats the ETA on this stuff

redlinezak

Do you offer anything for the JZS161?

Thanks