R3DGS3

I was wondering if anyone has done some updated LED light for like the climate control and buttons are on the dash ? My friend just did it to his SC with some neo wedge T5 T3 bulbs wanted to know if it the same thing ????

Here are some pics of what his look like i want them to be blue though

mkiiisupra

I think quite a few people have done it. I got mine from Deknick, whose lighting happens to be blue like you were talking about. You could try Timywong too.


Floor lights are white but you can't even make it out in this picture

boostedGS

iTrader: (26)

I wanted to do the same too. Does the T3 bulb work for the cluster, climate control, radio and shifter?

YeA 2jZ

iTrader: (15)

so does anyone have an answer to the bulb question ?????

mkiiisupra

I can't answer the question because Deknick put the kit together and sent it to me, but he could answer if you pm him or if he chimes in

BlackLight

but how would you get the to change the LED in the climate control section??? i havent looked at my unit properly but those who have, can the climate control be taken apart to that exent where you can change the LED's wihout braking the unit?

YeA 2jZ

iTrader: (15)

yes you can open it up to get to the bulbs i am going to be doing this with the OP when the LED bulbs come in

BlackLight

what about the bulbs in the speedo??? is there a section on how to get to them/ how to remove the dash?

mkiiisupra

Check the How-to thread. They're all posted at the bottom by Deknick

BlackLight

cool, thanks

BlackLight

are all the bulbs neo wedgs? i wanna get that fresh daylight white...... blue seems to much like VW to me

what type did you put in the speed section of your dash????

BlackLight

off hand, any one know how many bulbs i will need and of what type/quantity...?

myaristo95

looks nice. i want to do the same to my 1st gen gs300 is there like a DIY thread here?

BlackLight

anyone have pictures of the instrument cluster removal to the LED level, not just the for screws to initally remove the cluster from the car????

mkiiisupra

When you pull the cluster out and unhook the connectors, you can see what screws hold the circuit boards together and you just undo the screws that need to come off. Go slow and just take your time looking at it but you should be able to tell just by looking. And there's 2 strap-looking things at the top you'll see, you just pull up on the white tab that runs around it and they unhook