Free Screen Protector for your Phone
#31
Lexus Test Driver
iTrader: (1)
My postage showed 8/27 too and I got mine today.
The screen protector is crap though. It's too sticky. I ordered 2 knowing I would mess the first one up while playing with it. The fit isn't good so I had to trim it a bit. The "clear" film got foggy right after I peeled it off its paper. When I applied it on the phone (even with spraying with Windex), the film is permanently damaged already.
Here's a description of what I mean. Imagine taking clear shipping tape. Take the tape and use it on something and peel it off. That's what my screen protector film is like. It's fugly and ruins the screens resolution. Ima try something else.
Didn't cost me much though... so can't really complain, but WOULD NOT recommend.
The screen protector is crap though. It's too sticky. I ordered 2 knowing I would mess the first one up while playing with it. The fit isn't good so I had to trim it a bit. The "clear" film got foggy right after I peeled it off its paper. When I applied it on the phone (even with spraying with Windex), the film is permanently damaged already.
Here's a description of what I mean. Imagine taking clear shipping tape. Take the tape and use it on something and peel it off. That's what my screen protector film is like. It's fugly and ruins the screens resolution. Ima try something else.
Didn't cost me much though... so can't really complain, but WOULD NOT recommend.
#32
Lead Lap
I thought so too. There are those freebies that are not worth the shipping fee to get. and be careful on which web site you give out your credit card info to.
Thanks for posting the info though.
Thanks for posting the info though.
#33
Lexus Champion
you need to use it with WATER for it to fit DECENT, once water is applied, move the screen protector around so it can fit then squeegee the remaining water under the screen protector out so its clean. Then give it a day for whatever water is behind the screen protector left to dry away. But the part that annoys me is that the screen protector is super sticky if you mess up, you're SOL cus particles WILL get stuck to the adhesive. The cut out were decent but not exact, this was for my old iphone 3G.
#35
Lexus Test Driver
iTrader: (1)
Just wanted to give you guys an update. I've gotten it successfully fitted on the front screen. Haven't tried all around the body as I don't think it'll fit well anyways.
I ended up getting it done on the 2nd set I ordered after I found out how to work with the product. I cut the sheet down a bit so it's actually smaller than my screen. I then sprayed my hands with Windex (or something equivalent) and sprayed the film with Windex completely. Then I layed the screen on the phone and used a credit card to squeeze out the water. There was still a lot of water. It still looked blurry and distorted at first, but once it dried in a few hours the white blurry spots disappeared.
I ended up getting it done on the 2nd set I ordered after I found out how to work with the product. I cut the sheet down a bit so it's actually smaller than my screen. I then sprayed my hands with Windex (or something equivalent) and sprayed the film with Windex completely. Then I layed the screen on the phone and used a credit card to squeeze out the water. There was still a lot of water. It still looked blurry and distorted at first, but once it dried in a few hours the white blurry spots disappeared.
#37
Lead Lap
iTrader: (6)
I wouldn't use windex, if it's anything like the other screen protectors I've used over the years; a drop or two of baby shampoo in water, mix then let sit till the bubbles go down. Wipe down well with microfiber and alcohol. Go to the bathroom, turn the shower on hot so the steam can help take the dust particles out of the air, turn off device, remove battery or lock, wash hands well, dip fingers in soap solution then grab the protector, remove backing and dip into soap solution, shake excess water off and apply to phone, you'll have some time to position it where you want it and use a cc to squeegee water out from the center to the edges, holding it in position or repositioning as necessary.
#40
yea they arent that great. its way too sticky and gets ruined easily. i didnt try it with water or window though but too late i already threw it out :/
i used it on the back of the fone and that looks pretty decent. there are some small smudges but the phone looks glossy on the back. i do not recommend it for the screen though.
i used it on the back of the fone and that looks pretty decent. there are some small smudges but the phone looks glossy on the back. i do not recommend it for the screen though.
#45
Lexus Champion
iTrader: (4)
I dont understand why people are bashing this product when your clearly putting it on wrong.. You are not supposed to use windex and you should not be handling these with dry hands..
DonCorleone is correct.. mix a drop or two of baby shampoo and filtered water and spray both the protector and phone.. I would recommend looking at a youtube video to get an idea on how to install a shield..I installed my front in just a matter of minutes and it went on perfect .. i will be ordering a set for my iphone4..
DonCorleone is correct.. mix a drop or two of baby shampoo and filtered water and spray both the protector and phone.. I would recommend looking at a youtube video to get an idea on how to install a shield..I installed my front in just a matter of minutes and it went on perfect .. i will be ordering a set for my iphone4..