1/2" Ingersoll Rand 2135Ti Impact gun

Thread Tools
 
Search this Thread
 
Old 05-27-09, 08:09 PM
  #16  
GSteg
Rookie
Thread Starter
iTrader: (15)
 
GSteg's Avatar
 
Join Date: Jul 2005
Location: CA
Posts: 16,017
Likes: 0
Received 78 Likes on 60 Posts
Default

No one wants to buy my air gun? It's taken every bolts/nuts I've thrown at it.

BTW, this gun has multiple power settings so you dont have to use full blast all the time. For lug nuts, you can use the lowest setting to conserve air.
GSteg is offline  
Old 05-27-09, 09:11 PM
  #17  
IndecentSC
Lexus Test Driver
iTrader: (3)
 
IndecentSC's Avatar
 
Join Date: Apr 2004
Location: CLFL
Posts: 1,594
Likes: 0
Received 0 Likes on 0 Posts
Default

how long have you own/use this gun for?
IndecentSC is offline  
Old 05-27-09, 09:17 PM
  #18  
GSteg
Rookie
Thread Starter
iTrader: (15)
 
GSteg's Avatar
 
Join Date: Jul 2005
Location: CA
Posts: 16,017
Likes: 0
Received 78 Likes on 60 Posts
Default

A few years. I use it for light duty stuff, but I always oil it before and after. Few members here can attest to the gun. It shoots like it's still new.

I have multiple IR guns which is why I'm selling some of them. No use for me to have a few if I dont work on my car like I use to.

Last edited by GSteg; 05-27-09 at 09:21 PM.
GSteg is offline  
Old 05-28-09, 02:02 PM
  #19  
IndecentSC
Lexus Test Driver
iTrader: (3)
 
IndecentSC's Avatar
 
Join Date: Apr 2004
Location: CLFL
Posts: 1,594
Likes: 0
Received 0 Likes on 0 Posts
Default

Pm sent....
IndecentSC is offline  
Old 05-28-09, 10:46 PM
  #20  
eyezack87
Camry ConeKiller
iTrader: (4)
 
eyezack87's Avatar
 
Join Date: Jun 2007
Location: CA
Posts: 5,004
Received 2 Likes on 2 Posts
Default

Originally Posted by Blkexcoupe
I'll be ordering them in a week or two unless some other problems pop up by then. I had to stop driving the SC on uneven roads because it is so bad.
Dang, wont have mine till mid summer. Payin off my ticket first
eyezack87 is offline  
Old 05-28-09, 11:02 PM
  #21  
radicalrev
Lexus Champion
iTrader: (2)
 
radicalrev's Avatar
 
Join Date: Oct 2007
Location: Socal
Posts: 2,855
Likes: 0
Received 2 Likes on 2 Posts
Default

henry!! are you in OC area? i need to take my spacers out but need an air gun to do it (i tried muscling it)...was wondering if i can stop by your place for 5 mins to take it out? HAHAHAHA....
radicalrev is offline  
Old 05-28-09, 11:09 PM
  #22  
GSteg
Rookie
Thread Starter
iTrader: (15)
 
GSteg's Avatar
 
Join Date: Jul 2005
Location: CA
Posts: 16,017
Likes: 0
Received 78 Likes on 60 Posts
Default

Yes I'm in the OC. Just come on by and I'll help you out

BTW is your lug nuts on too tight or what?
GSteg is offline  
Old 05-29-09, 08:45 AM
  #23  
GeneGSW
Driver School Candidate
 
GeneGSW's Avatar
 
Join Date: Aug 2007
Location: XX
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default

strong enough to take off a crank pulley bolt?
GeneGSW is offline  
Old 05-29-09, 10:30 AM
  #24  
GSteg
Rookie
Thread Starter
iTrader: (15)
 
GSteg's Avatar
 
Join Date: Jul 2005
Location: CA
Posts: 16,017
Likes: 0
Received 78 Likes on 60 Posts
Default

Eh it depends on the car. Most of the time mechanics resort to 6ft cheater bars and such to break it. I know you're definitely not going to get the crank bolts off of a mid 90s Honda Accord with this gun.

Most lighter 3/4" gun wouldn't even do it. A 1" gun would most likely be able to do it but those are expensive as crap.

But for every other bolts, the 2135ti can do it no problem.
GSteg is offline  
Old 05-29-09, 04:10 PM
  #25  
GeneGSW
Driver School Candidate
 
GeneGSW's Avatar
 
Join Date: Aug 2007
Location: XX
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default

1jz/2jz crank pulley bolt
GeneGSW is offline  
Old 05-30-09, 06:48 AM
  #26  
IndecentSC
Lexus Test Driver
iTrader: (3)
 
IndecentSC's Avatar
 
Join Date: Apr 2004
Location: CLFL
Posts: 1,594
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by GeneGSW
1jz/2jz crank pulley bolt
manual impact does wonders for that bolt...
IndecentSC is offline  
Old 05-30-09, 04:55 PM
  #27  
99Aristo
Lead Lap
iTrader: (19)
 
99Aristo's Avatar
 
Join Date: Nov 2007
Location: NW Indiana
Posts: 567
Likes: 0
Received 1 Like on 1 Post
Default

hmmm.....almost bought one off the tool truck Friday for $360 plus tax, they're $298 on ebay new and shipped so this is a screaming deal if it's lightly used as claimed. I should buy this and save myself some $$.
99Aristo is offline  
Old 05-30-09, 04:57 PM
  #28  
99Aristo
Lead Lap
iTrader: (19)
 
99Aristo's Avatar
 
Join Date: Nov 2007
Location: NW Indiana
Posts: 567
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by GSteg
Eh it depends on the car. Most of the time mechanics resort to 6ft cheater bars and such to break it. I know you're definitely not going to get the crank bolts off of a mid 90s Honda Accord with this gun.

Most lighter 3/4" gun wouldn't even do it. A 1" gun would most likely be able to do it but those are expensive as crap.

But for every other bolts, the 2135ti can do it no problem.
? huh! Funny you should say this...I was doing a timing belt and such on a 1992 Accord with 60k awhile back and my lesser IR wouldn't take the crank bolt off...but this particular one you're selling, over 5 other impacts in my shop, managed to take it off in seconds. That is why I want this! PM me, I can paypal ya. And in the next state over, dreadfully hot Arizona.
99Aristo is offline  
Old 05-30-09, 05:15 PM
  #29  
GSteg
Rookie
Thread Starter
iTrader: (15)
 
GSteg's Avatar
 
Join Date: Jul 2005
Location: CA
Posts: 16,017
Likes: 0
Received 78 Likes on 60 Posts
Default

The gun has been sold, however I do have another one that I might sell. I'll let everyone know by tomorrow night. I got quite a few PMs for this gun. Seems to be a favorite

I dont know about 60k mile accords, but the ones with near 200k miles are damn hard to take off. This gun is powerful though. I really like it a lot out of all my impacts, but I just dont work on cars like I use to. No sense in having all these guns laying around.
GSteg is offline  
Old 06-28-09, 02:20 PM
  #30  
GSteg
Rookie
Thread Starter
iTrader: (15)
 
GSteg's Avatar
 
Join Date: Jul 2005
Location: CA
Posts: 16,017
Likes: 0
Received 78 Likes on 60 Posts
Default

Back up to the top. I have another one but dont want to make duplicate threads.. LOCAL (714) buyers only. $130 pickup. This is seriously one powerful gun. I just reread a review where someone was able to take out their crank pulley bolt on their GS400 within 2 seconds. I underestimated the power
GSteg is offline  


Quick Reply: 1/2" Ingersoll Rand 2135Ti Impact gun



All times are GMT -7. The time now is 11:42 AM.