Club Lexus Forums - GS - First Generation http://www.clublexus.com/forums Discussion about the first generation GS300 en Sat, 21 Nov 2009 19:22:55 GMT vBulletin 60 http://www.clublexus.com/forums/images/misc/rss.jpg Club Lexus Forums - GS - First Generation http://www.clublexus.com/forums my car and the rain http://www.clublexus.com/forums/gs-first-generation/465616-my-car-and-the-rain-new-post.html Sat, 21 Nov 2009 07:09:01 GMT hello everyone i have a quick question.every time it rain for a long period of time my car act like it doesn't want to start:confused:.dose anyone know what can possibly cause this?thanks for the help in advance:) ]]> GS - First Generation ROBGS300 http://www.clublexus.com/forums/gs-first-generation/465616-my-car-and-the-rain.html urgent! help! radiator empty. reserve tank full. overheat. http://www.clublexus.com/forums/gs-first-generation/465408-urgent-help-radiator-empty-reserve-tank-full-overheat-new-post.html Fri, 20 Nov 2009 04:43:44 GMT one problem. radiator tank was empty but reserve tank was full whats going on? help! and coolant leaking and sparying everywhere hoses are good when i took them out one problem. radiator tank was empty but reserve tank was full whats going on? help! and coolant leaking and sparying everywhere hoses are good when i took them out ]]> GS - First Generation SGVARISTO http://www.clublexus.com/forums/gs-first-generation/465408-urgent-help-radiator-empty-reserve-tank-full-overheat.html Weird problem with cooling system http://www.clublexus.com/forums/gs-first-generation/465392-weird-problem-with-cooling-system-new-post.html Fri, 20 Nov 2009 03:49:39 GMT I have a 93 gs300 with 220,000 miles on it and i recently been experiencing overheating problems. I bought a new thermostat and installed it and it seems to be working fine but the problem is that even when the car is not overheating, the coolant resevior is bubbling over. I replaced the rad cap... I have a 93 gs300 with 220,000 miles on it and i recently been experiencing
overheating problems. I bought a new thermostat and installed it and it seems to be working fine but the problem is that even when the car is not overheating, the coolant resevior is bubbling over. I replaced the rad cap and i still hae the same problem. When i was looking at it today, the car was at normal temp and the coolant resevior was bubbling. I then just pushed down ton the radiator cap and the bubbling stopped. Whats going on here? The radiator cap is brand new btw. ]]> GS - First Generation zero44 http://www.clublexus.com/forums/gs-first-generation/465392-weird-problem-with-cooling-system.html 93 GS300 Build http://www.clublexus.com/forums/gs-first-generation/465012-93-gs300-build-new-post.html Wed, 18 Nov 2009 05:10:49 GMT Hi guys, My name is Losaun, I have a 93 GS300. I was looking forward to putting a 2JGTE swap into my GS until I found a black on black sc300 5speed for a dirt cheap price. So I purchased a GE engine for little of nothing. Cam seals, timing belt, water pump, rear man seal, dipstick seal, valve... Hi guys, My name is Losaun,

I have a 93 GS300. I was looking forward to putting a 2JGTE swap into my GS until I found a black on black sc300 5speed for a dirt cheap price. So I purchased a GE engine for little of nothing. Cam seals, timing belt, water pump, rear man seal, dipstick seal, valve cover gasket, oil pan gasket have all been changed. I have a few issues I need help right now.

1. when I spin the crank shouldn't I hear compression sounds? I spin the crank on the old engine and can hear compression sounds. Is there something I am missing? The new engine has under 90K on it and is really clean. I am trying to avoid putting the engine in the car and it has major failure issues. I know the timing is correct.

2. I dropped my torque converter on the floor from about 2 feet off the ground. should I be worried.

3. What do I need to do to get the torque converter seated into the trans correctly..

4. When I press the brakes hard at low speeds the front drivers wheels seems to completely move. what could this be?

5. I have the engine and trans out of the car and I am anxious to put the new one in but my rack and pinion is completly busted. Should I do it before the I put the engine back in? (potentially stupid question.....) Sorry...

Here are some pictures of my baby!!!
















]]> GS - First Generation Losaun http://www.clublexus.com/forums/gs-first-generation/465012-93-gs300-build.html Help rough idle http://www.clublexus.com/forums/gs-first-generation/464938-help-rough-idle-new-post.html Tue, 17 Nov 2009 20:42:22 GMT hey was goin on, i have a 95 gs300. My car has 240,000 miles on it. but i dont think ill ever part with it. i recently installed the driver side ball joint, and inner and outer tie rods. the ball joint broke in the spring and i jus let it sit there for about 4 months. now that its fixed when i... hey was goin on, i have a 95 gs300. My car has 240,000 miles on it. but i dont think ill ever part with it. i recently installed the driver side ball joint, and inner and outer tie rods. the ball joint broke in the spring and i jus let it sit there for about 4 months. now that its fixed when i start the car, after it is warm it idles very rough, almost like vroom, vroom, vroom... forgive my choice of words lol. but it slows down every time it goes back up until it finally shuts off. other then this it runs fine doesnt feel like its misfiring or nething on the highway or during normal driving. and there is no check engine light on. neone ever had this problem? neone kno whats wrong? plz help. ]]> GS - First Generation 95gslama http://www.clublexus.com/forums/gs-first-generation/464938-help-rough-idle.html Kazz Type I Body Kit http://www.clublexus.com/forums/gs-first-generation/464763-kazz-type-i-body-kit-new-post.html Mon, 16 Nov 2009 23:33:58 GMT Wondering if anyone knows the dimensions on the front bumper big mouth portion of the Kazz Type I kit. I am looking to purchase the kit and wanted to know what size intercooler will fit in that big mouth. Anyone here know the dimensions, from the picture it looks to be at least as wide as the... Wondering if anyone knows the dimensions on the front bumper big mouth portion of the Kazz Type I kit. I am looking to purchase the kit and wanted to know what size intercooler will fit in that big mouth.

Anyone here know the dimensions, from the picture it looks to be at least as wide as the front grille. The height is an issue for me though.

If anyone can provide any feedback that would be glorious, thanks! ]]> GS - First Generation mad_trbo http://www.clublexus.com/forums/gs-first-generation/464763-kazz-type-i-body-kit.html Losse control when car bump http://www.clublexus.com/forums/gs-first-generation/464650-losse-control-when-car-bump-new-post.html Mon, 16 Nov 2009 05:27:59 GMT I need your guy help or give me any suggestion. i have been having a problem with my car when goes bump and start lose control on wheel balance or some time goes around curve and turn back straight and then it start loosing control or unbalance on car. I have not bring my to mechanics shop to get... I need your guy help or give me any suggestion. i have been having a problem with my car when goes bump and start lose control on wheel balance or some time goes around curve and turn back straight and then it start loosing control or unbalance on car. I have not bring my to mechanics shop to get an inspection, because i am afraid they will not tell the truth. So please give me any idea with my car. Thank you very much. ]]> GS - First Generation mylexus_gs http://www.clublexus.com/forums/gs-first-generation/464650-losse-control-when-car-bump.html code reading http://www.clublexus.com/forums/gs-first-generation/464592-code-reading-new-post.html Sun, 15 Nov 2009 23:08:37 GMT i wanted to see if there were any hiden codes on my car.i did what the procedure said of jumping the ecu to read the codes.when i did it.the check engine and O/D light flashed together non stop.just flashing non stop, and not it the order if theer was a code.does anyone know what this means? i wanted to see if there were any hiden codes on my car.i did what the procedure said of jumping the ecu to read the codes.when i did it.the check engine and O/D light flashed together non stop.just flashing non stop, and not it the order if theer was a code.does anyone know what this means? ]]> GS - First Generation celm http://www.clublexus.com/forums/gs-first-generation/464592-code-reading.html Lamp failure modual swap http://www.clublexus.com/forums/gs-first-generation/464456-lamp-failure-modual-swap-new-post.html Sun, 15 Nov 2009 00:32:04 GMT we know when we put ser2 tail lights on ser 1 car you get the infamous tail light out light on the dash.some are saying put the ser2 lamp failure and it will take the light off. the part # on the ser1 lamp falure is 89373-30200,someone read me the part # of lamp failure which came off a 95 which... we know when we put ser2 tail lights on ser 1 car you get the infamous tail light out light on the dash.some are saying put the ser2 lamp failure and it will take the light off. the part # on the ser1 lamp falure is 89373-30200,someone read me the part # of lamp failure which came off a 95 which is ser2 and it was 89373-30200.if i put that one on it wont fix my problems correct?
need you gys help on this ]]> GS - First Generation celm http://www.clublexus.com/forums/gs-first-generation/464456-lamp-failure-modual-swap.html i want to see your EGR http://www.clublexus.com/forums/gs-first-generation/464317-i-want-to-see-your-egr-new-post.html Fri, 13 Nov 2009 08:18:33 GMT i just did service on my car. All i need is to see the EGR area in order to see where all the tubes goes. Can anyone help me(pictures please)? i just did service on my car. All i need is to see the EGR area in order to see where all the tubes goes. Can anyone help me(pictures please)? ]]> GS - First Generation GS300 I6 http://www.clublexus.com/forums/gs-first-generation/464317-i-want-to-see-your-egr.html On the LS side now... http://www.clublexus.com/forums/gs-first-generation/464163-on-the-ls-side-now-new-post.html Thu, 12 Nov 2009 06:05:04 GMT Couldn't find a clean 1st gen so I picked up a real clean 97 LS400. Installed Eibach/Bilstein suspension and my 20's.
Attached Images
 
]]> GS - First Generation jasonm http://www.clublexus.com/forums/gs-first-generation/464163-on-the-ls-side-now.html Name!..That!..Relay! http://www.clublexus.com/forums/gs-first-generation/464125-name-that-relay-new-post.html Thu, 12 Nov 2009 02:52:53 GMT Specifically the one that controls the tilt steering wheel switch,seats,and radio. Thanks in advance! Specifically the one that controls the tilt steering wheel switch,seats,and radio.

Thanks in advance! ]]> GS - First Generation Skitso-3 http://www.clublexus.com/forums/gs-first-generation/464125-name-that-relay.html NYC/ Tri State Area GS MEET? http://www.clublexus.com/forums/gs-first-generation/464079-nyc-tri-state-area-gs-meet-new-post.html Thu, 12 Nov 2009 00:09:36 GMT Hey I'm pretty new on here don't have any pics of my ride cause I can't figure out how to upload them successfully.:uh: I'm a proud second owner of a 93 Black GS ( No mods as of yet) But, I do post from time to time, and read the threads!:D I see they have meets regularly in CA, but lets face it's a little far to drive for a meet. :( Are there ever any meets in this area of the east coast (NYC)? Should we start one? How many people would be interested? Any one w/ info or idea's, or if you just want to say I'm crazy:woohoo: thats cool too. Thanks!!! ]]> GS - First Generation Stolen http://www.clublexus.com/forums/gs-first-generation/464079-nyc-tri-state-area-gs-meet.html How parts sensitive are our cars?(Denso Only) http://www.clublexus.com/forums/gs-first-generation/463891-how-parts-sensitive-are-our-cars-denso-only-new-post.html Wed, 11 Nov 2009 01:53:25 GMT I have a check engine light on, so I brought my car to my cousins shop, to have them read. They read down stream o2 sensor and Faulty TPS. I replaced both sensors myself. The o2 w a universal Bosch sensor, and the TPS w/, a Wagner brand. Did I just waste my money?? Because the codes won't reset even w the Snap on scan tool. Help on this thanks!!!:sad: Check engine lights are annoying!!!! ]]> GS - First Generation Stolen http://www.clublexus.com/forums/gs-first-generation/463891-how-parts-sensitive-are-our-cars-denso-only.html Looking for Aristo 2JZGTE ECU Pinout.. http://www.clublexus.com/forums/gs-first-generation/463848-looking-for-aristo-2jzgte-ecu-pinout-new-post.html Tue, 10 Nov 2009 22:05:06 GMT can anyone help me out? thanks! :) can anyone help me out?

thanks! :) ]]> GS - First Generation boosted86 http://www.clublexus.com/forums/gs-first-generation/463848-looking-for-aristo-2jzgte-ecu-pinout.html