Dashboard Display
#1
Driver School Candidate
Thread Starter
Dashboard Display
I have my dash set up to display the psi when I turn on my car. For some reason now before anything I get a maintenance required message. Does anyone know how to remove that message or change it back to the psi ? Thanks
#2
Lead Lap
The instructions for resetting the "maintenance required" message are on page 658 in the manual.
Press the trip odometer button until "trip A" is showing in the odometer display.
Shut off the vehicle.
While pressing and holding the trip odometer button, press the ignition button (but do not actually start the car, which is done by not having your foot on the brake) and wait to see all 0's on the trip odometer display.
When all 0's show the maintenance reminder will have been reset.
Also, if the maintenance required reminder came on at, say, 5000 miles, when the maintenance schedule calls for a tire rotation, it is no big deal, but, if it came on at a 10,000 mile interval, you really should get the oil changed at your earliest convenience.
Press the trip odometer button until "trip A" is showing in the odometer display.
Shut off the vehicle.
While pressing and holding the trip odometer button, press the ignition button (but do not actually start the car, which is done by not having your foot on the brake) and wait to see all 0's on the trip odometer display.
When all 0's show the maintenance reminder will have been reset.
Also, if the maintenance required reminder came on at, say, 5000 miles, when the maintenance schedule calls for a tire rotation, it is no big deal, but, if it came on at a 10,000 mile interval, you really should get the oil changed at your earliest convenience.
Thread
Thread Starter
Forum
Replies
Last Post
lester123
RX - 3rd Gen (2010-2015)
2
07-27-15 03:32 AM