Splash Guards
#62
Lead Lap
No Art, I bought the black ones from Ebay right after I got the car back in early 2013. A friend also has a Satin Cashmere 2012 model and installed the car color mud guards. After seeing his I liked the contrasting black more so I didn't paint them. They're still on there and still look good. I armorall them each time I wash the car so that they have a satin shine. I did install the rears and they installed easily and look perfect.
Last edited by bc6152; 05-15-15 at 01:57 PM.
#63
#64
Lead Lap
I drilled through the plastic bumper/rear panel to mount the mud guards. I used stainless screws and washers to eliminate rust. The installation was simple and it took me about 15 minutes for both sides. I did not have to remove the wheels.
#66
Lead Lap
#67
Lexus Test Driver
Originally Posted by bc6152
I was planning to take some photos but today in PA is teeming rain. Probably across the river too.
I'll do it when the weather clears.
I'll do it when the weather clears.
#68
Lead Lap
#69
Lexus Test Driver
Originally Posted by bc6152
Just the screws and a drill. Mine have been on for almost 4 years.
#70
Lead Lap
Good Luck with the project!
#71
Lexus Test Driver
Originally Posted by bc6152
It really is a simple install. Try to use stainless screws and a stainless washer = no rust...I used a 1/8" drill. After securing the top and bottom screws I painted the screw heads with some flat black paint and they're invisible. Let us know how you make out.
Good Luck with the project!
Good Luck with the project!
#73
Lead Lap
Nice job! Looks great and glad to help. Car is beautiful, too bad Jersey makes you put a tag on that pretty grille.
#74
Lexus Test Driver
Originally Posted by bc6152
Nice job! Looks great and glad to help. Car is beautiful, too bad Jersey makes you put a tag on that pretty grille.
#75
Lexus Test Driver
Originally Posted by bc6152
Nice job! Looks great and glad to help. Car is beautiful, too bad Jersey makes you put a tag on that pretty grille.