drove my car in flooded waters
#16
in reply to JAGTOES the car smoothed out a heck of a lot ....the RPM now stays stable at around 1100 or so it does not really come down from 1000.
in reply to jkayca i did not change the coils, and yes they have been moved around and still the same issue.
so you suggest i remove some plugs and see if they are fuel wet?
when i removed the old ones they were fuel wet what does this mean?
in reply to jkayca i did not change the coils, and yes they have been moved around and still the same issue.
so you suggest i remove some plugs and see if they are fuel wet?
when i removed the old ones they were fuel wet what does this mean?
#17
Try to remove + wire from the battery for a couple of hours then try it.
#18
Driver School Candidate
Thread Starter
Join Date: Mar 2015
Location: fl
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
the car idles at around 1000 rpm like i said before. the white smoke has a fuel smell. i stuck my finger in the exust and its oily like with moisture. i reran the computer once again and now i only receive a random misfire p0300 code. the temperature gauge goes to a normal position once it runs more than 10 mins
#20
the car idles at around 1000 rpm like i said before. the white smoke has a fuel smell. i stuck my finger in the exust and its oily like with moisture. i reran the computer once again and now i only receive a random misfire p0300 code. the temperature gauge goes to a normal position once it runs more than 10 mins
http://engine-codes.com/p0300_lexus.html
#21
Driver School Candidate
Thread Starter
Join Date: Mar 2015
Location: fl
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
update
so what i was hoping for didnt happen ....happened! there is no compression in cylinder 2 or 4...so i hydro locked the car since there was no water in the oil (dipstick) i didnt think that was the problem but it was. luckily my mechanic is charging me $2500 for a new block with a head and labor ...i dont think its to bad...thank you all for your help i learned a whole lot.
once again thanks
once again thanks
#22
Sorry to hear that mate.
Thread
Thread Starter
Forum
Replies
Last Post