ES - 5th Gen (2007-2012) Discussion topics related to 2007+ ES350

trunk lid inside assembly wet ?

Old 08-07-14, 08:36 AM
  #1  
Blueshark
Lead Lap
Thread Starter
 
Blueshark's Avatar
 
Join Date: Sep 2009
Location: canada
Posts: 718
Likes: 0
Received 3 Likes on 3 Posts
Default trunk lid inside assembly wet ?

Notice something weird when it rains, when i open my trunk lid, some water drips from the passenger linkage to the chassis, the part connecting the lid to the chassis covered with plastic. It is a few drips, but if i open rapidly, the choc of the lid make the water drip more.

I took on myself to removfe the lid trim and touch the areas where the water is and it is located on the tail light of the trunk lid just above the drain holes. The water drips from the chassis around the taillight.

I did some test to locate the infiltration:

1. tape all the outside taillight and hose down, it still drips.
2. I touch the inside of the chassis for wetness, and only the areas of the chassis under the taillight is wet to the touch, but no puddle, before water drains out of the oem hole.
3. the taillight assembly is dry, meaning the seal is dry.
4. I use a flashlight to peek inside the chassis, only inside of the bottom part of the trunk is wet, nowhere else.

Off course, it happen only went i open the trunk lid when it is raining, not when the weather dries up.

It is normal the the inside of the trunk lid may we wet when raining or it will be prone to rust in the future.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dewana421
ES - 5th Gen (2007-2012)
10
06-27-23 05:37 AM
yardie876
GS - 4th Gen (2013-2020)
4
08-05-14 09:44 PM
Christian
LS - 1st and 2nd Gen (1990-2000)
3
05-22-06 05:25 PM
Jmai22
GS - 1st Gen (1993-1997)
31
09-25-04 08:03 PM
lspower
LS - 1st and 2nd Gen (1990-2000)
11
09-09-04 07:41 PM


Thread Tools
Search this Thread
Quick Reply: trunk lid inside assembly wet ?



All times are GMT -7. The time now is 02:41 PM.