ES - 5th Gen (2007-2012) Discussion topics related to 2007+ ES350

Heat Shield Noise?

Thread Tools
 
Search this Thread
 
Old 01-19-12, 04:53 PM
  #1  
smarty666
Rookie
Thread Starter
 
smarty666's Avatar
 
Join Date: Aug 2011
Location: NJ
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Default Heat Shield Noise?

Hey everyone,

When I first got my ES, there was no knocking or pinging coming from the heat shield when I turned the car off. As the months are going on, now I'm starting to get a lot of knocking/pinging/clinging noises coming from the heat shield when I turn the car off. Do any of you have this? I've tried regular, mid-grade, and premium gas and it continues to make the noise with all grades of gasoline so its not the gas being used. Any thoughts?
Old 01-20-12, 06:21 AM
  #2  
mlacomb
Lead Lap
 
mlacomb's Avatar
 
Join Date: Oct 2011
Location: OH
Posts: 432
Likes: 0
Received 6 Likes on 6 Posts
Default

I get the ticking as well; it's metal cooling at different rates. Briefly thought about going to the dealer about it; however every car I've had that went over about 25k on the odometer does it. Maybe reseating some of the screws/bolts around whatever's moving down there would help at first, but I'd bet money that the sound will come back.
Old 01-20-12, 07:34 AM
  #3  
NJLEXES
Intermediate
 
NJLEXES's Avatar
 
Join Date: May 2004
Location: New Jersey
Posts: 366
Received 41 Likes on 35 Posts
Default

Other possibility is maybe there is some dirt or something splashed up from underneath the car onto the shield. That might cause the temperature of the shield to be uneven perhaps ? Maybe look to see if you see anything on it....outside and/or inside.
If so, maybe try cleaning it...WHEN IT"S COLD !

As per the other member comment- suggestion, suppose it is possible it might "loosen up" after a while due to the constant heating and cooling causing expansion/contraction.

Wouldn't worry about it in any case..........
Old 01-20-12, 11:54 AM
  #4  
oldgrump
Pole Position
 
oldgrump's Avatar
 
Join Date: Jul 2011
Location: BC
Posts: 371
Likes: 0
Received 12 Likes on 8 Posts
Default

As suggested the ticking/clicking noises after shutdown is just the cooling down of the engine and particularly the exhaust system components, including multiple heatshields (I'm not sure what specific heatshield that you might be referring to). It may be more obvious in colder weather. It is NOT going to be affected by the fuel used.......knocking and pinging are terms in relation to improper combustion during engine operation.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Brosillo
IS - 2nd Gen (2006-2013)
7
06-13-18 12:41 PM
megamarine
Performance & Maintenance
5
08-18-09 03:57 PM
253 Lexus
Performance & Maintenance
16
12-27-07 06:45 PM
Metlupass2
GS - 2nd Gen (1998-2005)
4
07-24-07 10:45 PM
joker
ES - 1st to 4th Gen (1990-2006)
22
07-05-06 02:54 PM



Quick Reply: Heat Shield Noise?



All times are GMT -7. The time now is 04:10 PM.