help with diagnostic
04-24-15, 04:13 PM
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2015
Location: nc
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
code p1354
I have a 2001 es 300 I'm getting p1354 codes along with cylinders 2 4 6 misfiring Along with multiple abs codes. Could this issue be the varible timing senso going bad on that side of the motor
Last edited by jwylie6500; 04-25-15 at 09:57 AM. Reason: different question
04-26-15, 03:01 PM
#2
Yes, it could. Pull the oil feed lines to each bank and check the filters (small mesh cones in the inlet).
If they are good, pull the OCVs and test them on the bench - apply 12v across the leads and see if they actuate. If they seem good, swap them and see if the problem moves to the other bank.
If they are good, pull the OCVs and test them on the bench - apply 12v across the leads and see if they actuate. If they seem good, swap them and see if the problem moves to the other bank.
Thread
Thread Starter
Forum
Replies
Last Post
Jordan95
ES - 1st to 4th Gen (1990-2006)
0
01-22-18 07:23 PM
4u2kno
ES - 1st to 4th Gen (1990-2006)
4
11-25-10 10:06 PM
