ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

caliper bracket pins bushing

Thread Tools
 
Search this Thread
 
Old 04-29-13, 11:05 PM
  #1  
gabzor
Pole Position
Thread Starter
 
gabzor's Avatar
 
Join Date: Aug 2012
Location: CA
Posts: 268
Received 1 Like on 1 Post
Default caliper bracket pins bushing

well since my mom's car's caliper pin seals were all jacked up, i took the caliper bracket off today and rebooted them.. i believe i did it wrong (i stuck the boots in without grease) but i greased em up again and the brakes work good now..

problem is i bought a seal kit from pepboys ($20) i know... i could have bought it online for 5 bucks, but my mom needed the car today..

the rubber bushing that goes in the grooves from pep boys blew up as soon as i stuck em into the seal, i guess it was too big for it?

but i just put the pins back without the bushings, and i did lube em.. am i okay or should i replace asap?
Old 05-04-13, 12:22 PM
  #2  
JonnysES
Driver
 
JonnysES's Avatar
 
Join Date: Sep 2012
Location: NC
Posts: 179
Likes: 0
Received 0 Likes on 0 Posts
Default

That's a seal to keep stuff from getting in the lubed area. She can drive it until you buy some more. I wouldn't let it go a long period like that. BTW I know some cars that never had them the boot will keep anything and everything out most of the time but an engineer somewhere says it should have it.

Last edited by JonnysES; 05-04-13 at 09:21 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
illini19
GS - 3rd Gen (2006-2011)
48
06-21-21 07:00 AM
tweety562
RX - 2nd Gen (2004-2009)
3
07-23-16 02:03 PM
Sup2jzgte
Suspension and Brakes
3
05-05-10 04:32 PM
Saiji
Suspension and Brakes
19
03-24-08 04:29 PM



Quick Reply: caliper bracket pins bushing



All times are GMT -7. The time now is 07:08 PM.