ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

Help!!!

Thread Tools
 
Search this Thread
 
Old 10-15-12, 07:36 PM
  #1  
Victor520
Driver School Candidate
Thread Starter
 
Victor520's Avatar
 
Join Date: Sep 2012
Location: usa
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default Help!!!

Hi all,

I've got a 2004 Citroen C3 SX 1.4 HDi 92Bhp and had the engine light come on recently so took it in to the garage for diagnositcs. And they used a tool named ALLSCANNER SUBARU SSM-III SSM3,I searched it in the internet and found it . But I don't know how about it.

Originally it returned four codes but they were not sure is these were old or new codes so reset the computer and told me to come back when the light came back on to see what was there. This happened so duly went back to the garage.

They returned the following codes:

P0401

P0400

P1351

There advice at this stage was that it must be the EGR valve and it would need replacing. I know these models can suffer from a sticky EGR value so I asked to have it cleaned and they said this wouldn't be worth it and it would be best to replace the unit. They also said that 'we can't confirm this will fix the problem so there might be more work needed after this' - not inspiring confidence at this point!

I should say that the light is intermittent - some days it's there others it's not. when it is there it's a solid light and accompanied by three beeps to let me know there's a problem.

I also have the following to note on the car (which may have nothing to do with this issue but who knows?) ... When I reverse the car I get a combination of six beeps (standard I believe when selecting reverse) but sometime this gives me three short beeps and then starts to sound like reversing sensors until I get the flat line noise - considering I don't have parking sensors this really confuses me!!!

There is also a metallic rattling when the engine warms up which I think is coming from the exhaust (loose fitting perhaps?) from low revs up to about 1500rpm in the lower gears and then comes back after about 3/3500 rpm.

I don't just want to throw £200 at the problem on the garages say so when it might not do any good at all. Can anyone help with ideas or suggestions as to how to fault find the real issue and not just replace parts?

I've had the car about two months and it's covered 55k. Has a warranty with Warranty Wise but they don't want to know.

Thanks in advance,

Last edited by Victor520; 02-24-13 at 11:24 PM.
Old 02-25-13, 10:57 PM
  #2  
Hayk
Lead Lap
iTrader: (1)
 
Hayk's Avatar
 
Join Date: Feb 2009
Location: NJ
Posts: 4,101
Received 291 Likes on 230 Posts
Default

Can't tell if this is spam, or if this person is really trying to get help for his Citroen on a Lexus ES forum...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Monsclara
SC430 - 2nd Gen (2001-2010)
3
10-08-12 05:18 AM
lexusLO
Performance & Maintenance
1
11-16-11 09:46 AM
My98ES300
ES - 1st to 4th Gen (1990-2006)
1
07-25-11 07:44 AM
shelby
LS - 1st and 2nd Gen (1990-2000)
2
11-06-03 12:51 AM



Quick Reply: Help!!!



All times are GMT -7. The time now is 11:26 AM.