ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

What have you done to your ES today?

Thread Tools
 
Search this Thread
 
Old 03-13-14, 08:32 PM
  #421  
01LEXPL
Lead Lap
Thread Starter
iTrader: (10)
 
01LEXPL's Avatar
 
Join Date: Sep 2007
Location: Canada
Posts: 4,400
Received 68 Likes on 58 Posts
Default

Originally Posted by 01LEXPL
Changed bank 2 coils... [2,4,6]

Last night in the drivethru my interior starts chaking/steering wheel vibrating [in gear, stopped]. Great, seconds later trac off, minutes later flashing CEL. Drove it to work & back [~3 min drive].

Goddamnit. Misfire.

Got to the shop the front cat was glowing red [10 min drive]. Looked around for possible causes, other 1MZ's reported issues like this as well.

I assumed OCV, then read to check the VVT actuator; tested working perfectly fine - therefore OCV can't be the cause... as it is mechanical and relates to that functioning VVT actuator. And throws different codes [iirc p1349/59] when it's a straight misfire its P300,302, etc.

Anyways, all three coils sh&t the bed for whatever reason, 300$ later she runs again
Nope.

Sh&t's ****ed again. Made three trips today totaling <10mi.

Great! Probably going to ruin my cat in the process as well!

Pissing me off... hopefully I can find a reasonable fix... I have the bug for something new... and the auction is coming up this weekend....
Old 03-14-14, 05:06 AM
  #422  
speedkar9
Lexus Champion
 
speedkar9's Avatar
 
Join Date: Aug 2012
Location: Toronto, Canada
Posts: 1,729
Likes: 0
Received 118 Likes on 89 Posts
Default

Originally Posted by clintbw
I just bought my 2001 Lexus ES300 a couple weeks ago from a cheap dealership and it needed some work. It's in very good condition overall and I felt after all the work I needed to do to it, it was still a great deal..
Only 132K and you had to change knock sensors and head gaskets? Was this car not taken care of properly?
Old 03-14-14, 07:52 AM
  #423  
clintbw
Rookie
 
clintbw's Avatar
 
Join Date: Mar 2014
Location: CO
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by speedkar9
Only 132K and you had to change knock sensors and head gaskets? Was this car not taken care of properly?
The car's physical condition is nearly perfect. However, under the hood is somewhat of a different story. I figure the previous owner(s) just took it to any shop for service and after taking apart everything, I've noticed aftermarket filter, hoses, and damaged wire looms. The valve cover gaskets are barely leaking but since I'm going to replace the other gaskets I figured I should change these as well. The reason the knock sensors/harness failed, my guess, is the coolant leak underneath the intake. I've resealed the coolant plate underneath the bypass hose, and I'm replacing the bypass hose with an OEM Lexus part.

Also, I must give you credit, Speedkar9!! I previously had a V6 Camry that DID have a major leak in the rear valve cover and your video guided me through it! Before then, I wasn't very familiar with the 1MZ-FE. You're a gem. Also liked your comment about "brother's toothbrush" amidst all my frustration, haha. Glad to see you on ClubLexus and your response to my post : )
Old 03-14-14, 09:31 AM
  #424  
clintbw
Rookie
 
clintbw's Avatar
 
Join Date: Mar 2014
Location: CO
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Default

Got my brand new OEM floor mats in from Concord Lexus. They are fresh!
Old 03-14-14, 07:28 PM
  #425  
fountainiv
Driver School Candidate
 
fountainiv's Avatar
 
Join Date: Oct 2009
Location: Maryland
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

New poster here...2003 ES - Original Owner

Not all done "today", but here are the things I've done recently. With 226K+ miles, I decided to freshen her up..

Replaced the original altenator
Replaced rear passenger door actuator
Replaced original 10+ year old tint with an 18 percent carbon tint all around
Restored the headlights
Added LED fog lights
Added XM tuner and service to my existing Pioneer system
Added a rear camera
Added a new set of hyper silver aftermarket wheels (stock size)
Touched up paint nicks all around
Clay-barred the whole car
Waxed whole car with turtle wax

What have you done to your ES today?-forumrunner_20140314_222538.png



What have you done to your ES today?-forumrunner_20140314_222554.png
Old 03-14-14, 08:34 PM
  #426  
RXGS
Lexus Test Driver
iTrader: (2)
 
RXGS's Avatar
 
Join Date: Jul 2007
Location: .
Posts: 6,627
Received 210 Likes on 171 Posts
Default

Looks great, very well taken care of
Old 03-14-14, 09:18 PM
  #427  
Real671
Rookie
iTrader: (2)
 
Real671's Avatar
 
Join Date: Mar 2011
Location: BAY AREA, CA
Posts: 92
Likes: 0
Received 1 Like on 1 Post
Default

Finally rolled my fenders last week to put my wheels on



Old 03-15-14, 04:41 PM
  #428  
bboatman
Driver School Candidate
 
bboatman's Avatar
 
Join Date: Mar 2014
Location: Nevada
Posts: 9
Likes: 0
Received 1 Like on 1 Post
Default Wash and wax 2002 4ES

I washed and waxed our new 2002 baby
Attached Thumbnails What have you done to your ES today?-image.jpg  
Old 03-15-14, 04:56 PM
  #429  
bboatman
Driver School Candidate
 
bboatman's Avatar
 
Join Date: Mar 2014
Location: Nevada
Posts: 9
Likes: 0
Received 1 Like on 1 Post
Default 67k miles. Just got it home this week.

We paid $8,800 for her.
Attached Thumbnails What have you done to your ES today?-image.jpg  
Old 03-15-14, 06:58 PM
  #430  
brucelee1
Racer
iTrader: (2)
 
brucelee1's Avatar
 
Join Date: Sep 2007
Location: MA
Posts: 1,335
Received 87 Likes on 74 Posts
Default

Man, that looks very nice indeed!
Old 03-15-14, 09:54 PM
  #431  
bboatman
Driver School Candidate
 
bboatman's Avatar
 
Join Date: Mar 2014
Location: Nevada
Posts: 9
Likes: 0
Received 1 Like on 1 Post
Default

Thanks! It's my first lexus. It has been babied pretty good. I probably paid more than I should have, but it's not every day you come across an '02 with 67k on the ticker and owned by a little old lady...literally.
Old 03-16-14, 06:09 AM
  #432  
Timothyj
Pole Position
 
Timothyj's Avatar
 
Join Date: Apr 2009
Location: Mich.
Posts: 328
Likes: 0
Received 0 Likes on 0 Posts
Default

Not today, but yesterday, washed all 3 of my es cars, gold 04 43000 miles , blue 04 110000 miles and gold 02 137000 miles just bought the 02 great cars, 50 degrees and today 20 degrees in Mich. crazy weather.
Old 03-16-14, 10:34 AM
  #433  
Rontgen
Driver School Candidate
 
Rontgen's Avatar
 
Join Date: Mar 2014
Location: Oklahoma
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Ordered a mountain of parts for my new-to-me 2000 ES300 with 159K miles:

AISIN Timing Belt kit with new idlers, tensioner, & Water Pump
Cam & Crank seals
Wiper Blades
Accessory Belts
PCV & Grommet
Valve Cover gaskets
Spark Plugs
Engine Air Filter
A/C Filter
Gas Cap

RockAuto.com - $288 shipped for everything. After that is done, I'll swap out fluids and this car should be good to go!

One of my other cars is a BMW M3 and I'm shocked at how cheap Toyota/Lexus parts are. Or, maybe I've just been conditioned to BMW's outrageous pricing!
Old 03-16-14, 12:41 PM
  #434  
01LEXPL
Lead Lap
Thread Starter
iTrader: (10)
 
01LEXPL's Avatar
 
Join Date: Sep 2007
Location: Canada
Posts: 4,400
Received 68 Likes on 58 Posts
Default

^ unless they changed it from when I told them two years ago, the PCV will be wrong.

If its plastic its the wrong one, and if its a screw in metal unit, then you're okay.
Old 03-16-14, 01:47 PM
  #435  
PuReChaos
Pole Position
 
PuReChaos's Avatar
 
Join Date: Sep 2012
Location: WA
Posts: 386
Likes: 0
Received 4 Likes on 4 Posts
Default

Driver side fog light had water in it so it had that horrible looking condensation on it the past week. Took apart the fog light, cleaned, and resealed it. Now it looks back to normal


Quick Reply: What have you done to your ES today?



All times are GMT -7. The time now is 04:34 PM.