ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

Need Master Key for ES300

Thread Tools
 
Search this Thread
 
Old 08-02-10, 10:01 AM
  #1  
mzikram
Driver School Candidate
Thread Starter
 
mzikram's Avatar
 
Join Date: Jul 2010
Location: TX
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Need Master Key for ES300

I just bought a 2001 ES300 and the previous owner only had a velt (grey) key. I called a few dealerships and they said that since I do not have a master key, the computer (ECU) has to be replaced. The replacement will be paid bu Lexus but I still have to pay around $600.00 for the labor and two replacement master keys. I thought this is really too much for a key replacement.

Does anyone have a better and more economical way or experience of getting a replacement master key?

Thanks in advance
Old 08-02-10, 02:51 PM
  #2  
offroad200
Instructor
 
offroad200's Avatar
 
Join Date: Jul 2010
Location: SC
Posts: 889
Received 160 Likes on 119 Posts
Default

Try a local locksmith and see if they have the equipment to "flash" your ECU. Besides ECU replacement, that's the only way I know of.
Old 08-02-10, 05:13 PM
  #3  
PlatES300
Lead Lap
iTrader: (1)
 
PlatES300's Avatar
 
Join Date: Apr 2005
Location: Texas
Posts: 546
Received 9 Likes on 7 Posts
Default

Originally Posted by mzikram
I just bought a 2001 ES300 and the previous owner only had a velt (grey) key. I called a few dealerships and they said that since I do not have a master key, the computer (ECU) has to be replaced. The replacement will be paid bu Lexus but I still have to pay around $600.00 for the labor and two replacement master keys. I thought this is really too much for a key replacement.

Does anyone have a better and more economical way or experience of getting a replacement master key?

Thanks in advance
I had the same issue when I got my car. 600 actually is a good price considering it's from the dealer. When I tried to get my key done, the dealer wouldn't even touch it. They wanted to rip apart the entire ignition system and replace it (quoted around 2500).

What I ended up doing was buying a transponder key from a vendor on here, and I had a third party program the key for me. All they really have to do is reflash the computer. The key was about 150 at the time and another 300 to reprogram. So if the dealer is charging 600 for 2 keys and a reflash, then that's actually very good.
Old 08-02-10, 09:37 PM
  #4  
LarryParker
Driver
 
LarryParker's Avatar
 
Join Date: Nov 2002
Location: California
Posts: 110
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by mzikram
Does anyone have a better and more economical way or experience of getting a replacement master key?

Thanks in advance
If you search the threads here you will see many posts on the topic, including many by me. What I did when I had the same problem was to order two cut master keys online (using my VIN) (without remote buttons--buttons quadrupled the cost, $51 each vs $190 each), the I drove to Locksmith Charley's place
http://www.locksmithcharley.com/
in Phoenix.

I removed my car's ECU/ECM (Engine Control Unit or Engine Control Module) from behind the glovebox, he re-flashed it using his computer, (so it would accept the programmingnew master keys), I reinstalled the ECU, and Charley programmed the two new master keys plus the valet key I already had. This was far, far, cheaper than what Lexus wanted, which was for me to buy two new keys WITH BUTTONS, also known as remote keys, plus they wanted to install a new ECU at some very very high price. Lexus acted like the only keys the car was supposed to use were remote (expensive) keys. WRONG, Lexus!!!!!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bertwolf
ES - 1st to 4th Gen (1990-2006)
7
04-24-21 09:22 PM
dadoo
ES - 1st to 4th Gen (1990-2006)
19
06-30-18 09:41 PM
GAJones
ES - 1st to 4th Gen (1990-2006)
1
02-27-11 10:33 PM
SloStng
ES - 1st to 4th Gen (1990-2006)
1
06-10-10 08:53 PM
ericarog
ES - 1st to 4th Gen (1990-2006)
7
11-24-04 10:08 PM



Quick Reply: Need Master Key for ES300



All times are GMT -7. The time now is 12:53 AM.