ES BL155

iTrader: (3)

hi i ordered some HID's that came into and i installed. my headlights are off alignment. the drivers side is low and passenger side is high. i tried to align the passenger side with an 8mm socket. i kept screwing it in and out would not adjust at all. am i doing it wrong? please someone help me. thanks!

ES BL155

iTrader: (3)

anybody? i searched it but nothing really useful came up. please somebody help asap i cannot see while driving.

01LEXPL

iTrader: (10)

Make sure you are turning the right one?

The manual states as to which one to adjust/where & how...

I did mine in a whole 3 mins, and they were good to go.

ES BL155

iTrader: (3)

okay well i figured out the driver side.. its the screw right next to the high beam. but when i tried to do the same on the passenger side it would not work. any ideas?

01LEXPL

iTrader: (10)

No clue. And i would take a look but knowing my 2001 it is bound to be in a different spot...

Ie. Fog lights in the 00-01, mounting points are different than the earlier years, i thought i was removing it, but i ended up screwing up the adjustment simply by turning what i thought was holding it in place...

angmedic91

iTrader: (5)

I have a 98 ES300 and my adjustment bolt is 8mm and is near the top, between the lowbeam and hi beam light. you also should have bubble levelers on the top to let you know when your headlights are level. First park your car on a level surface, then to adjust up, facing the the headlight, turn bolt to the left with a 8mm wrench or socket, its the same for both lights and to lower the light, you turn the bolt to the right. BTW BL155, where did you get your Toyota front lip from? If I was to order it, what make and model car? Thanks.

ES BL155

iTrader: (3)

It was bought somewhere in hong kong, but i dont know the place because I got it as a gift. It would be for the toyota windom but its not an easy find.

Ariyanna

Where did you find those JDM corners?

mrbillslex

Can someone tell me how I aim the headlights on a 96 es300? I really need help since I can't see anything on the drivers side. Thanks
Is there anyone who can answer this for me?

Cosanostra

Here's the page from the 1993 FSM, should be the same on the '96.

mrbillslex

Thanks for the help I think I got it now