fog light issues
02-16-09, 01:19 PM
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2008
Location: Florida
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
fog light issues
okay so i have a 97 es300 with fog light issues. my fog lights havent worked since i got the car but i figured it was because of the bulbs being burnt out. i did a little research on here and found out that first you should check the relay switch in the drivers side. ive checked it and it seems to be working fine as i can hear it click when i switch the fogs on and off. so secondly i decided to go get some new bulbs and switch them out. i just got done changing the drivers side fog light bulb and im still not getting any light! so in my last ditch effort i went and changed the fog light fuse with a spare from the engine bay, and STILL no fogs!
what am i to do? what else can i check? please help! desperate here!
thanks in advance for any help or ideas
what am i to do? what else can i check? please help! desperate here!
thanks in advance for any help or ideas
02-16-09, 04:12 PM
#3
Driver School Candidate
Thread Starter
Join Date: Aug 2008
Location: Florida
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
yes the headlights have to be on in order for me to hear the relay for the fogs click. so i know the wires up to that point are fine, i dont know what could happen between there and the bulb.
02-17-09, 08:29 PM
#4
Driver School Candidate
Join Date: Feb 2009
Location: NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I have the same issue with a 96 ES300 and no fog lights
I had the same thing happen several years ago, I took apart the foglights and cleaned all the contacts, tested the bulbs and after a restart or to they worked until last week.
I hooked up the bulbs to a battery and they still work. I also cleaned the contacts, this time no go. Is it possible that it is the relay?
Where is the fog lamp relay on a 96 ES 300? I cannot find it...
I hooked up the bulbs to a battery and they still work. I also cleaned the contacts, this time no go. Is it possible that it is the relay?
Where is the fog lamp relay on a 96 ES 300? I cannot find it...
03-03-09, 09:09 PM
#5
Driver School Candidate
Thread Starter
Join Date: Aug 2008
Location: Florida
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
so what ive determined is that there is a short somewhere between the relay and where the bulb is connected. i finally figured out that i can put in a brand new fuse for the fog lights, try to turn them on, and it instantly blows the fuse.
what can i do about this? i dont know how to follow the wires to try and fix it. can i do something to directly wire them? are there any alternatives? do i have to find the short somehow or would i have to take it in to be looked at?
thanks for any help
what can i do about this? i dont know how to follow the wires to try and fix it. can i do something to directly wire them? are there any alternatives? do i have to find the short somehow or would i have to take it in to be looked at?
thanks for any help
03-04-09, 04:46 PM
#6
Driver School Candidate
Thread Starter
Join Date: Aug 2008
Location: Florida
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
i thought about doing that, but then they would always be on with no control to turn them off right? unless i had the headlights as a whole in the off position, whereas i ususally use the automatic setting. i also had the thought that if i spliced into the parking light wire like that (which is also the blinkers) would it make my fog lights blink with my blinker? lol
03-21-11, 02:52 PM
#7
Driver
Join Date: Oct 2005
Location: IL
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
OK I did a search first and can't find what I'm looking for...my question is how do I replace a bulb for fog-light...my left side fog works while my right appears to be burnt anyone here care to share what I have to do? I went under car and tried twisting bulb housing but it didn't budge help...TIA
Trending Topics
03-21-11, 04:39 PM
#8
OK I did a search first and can't find what I'm looking for...my question is how do I replace a bulb for fog-light...my left side fog works while my right appears to be burnt anyone here care to share what I have to do? I went under car and tried twisting bulb housing but it didn't budge help...TIA
Unscrew the cap behind the housing, then reach inside and undo the clip that hold the bulb in there. Replace bulb and do it in reverse. I DO find it easier to remove the entire housing though, that way I can check if anything is inside and whatnot
03-21-11, 04:51 PM
#9
Driver
Join Date: Oct 2005
Location: IL
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Old thread bump but oh well....
Unscrew the cap behind the housing, then reach inside and undo the clip that hold the bulb in there. Replace bulb and do it in reverse. I DO find it easier to remove the entire housing though, that way I can check if anything is inside and whatnot
Unscrew the cap behind the housing, then reach inside and undo the clip that hold the bulb in there. Replace bulb and do it in reverse. I DO find it easier to remove the entire housing though, that way I can check if anything is inside and whatnot
03-22-11, 10:42 AM
#11
Bolts are 8 or 10. There are 3 holding the housing to the bumper. I just unscrewed all the ones on the car itself rather than the ones on the housing. You'll have to play tetris to take it out correctly if I'm remembering right for the square foglights. Its been ages since I replaced them with the projector ones...
03-23-11, 07:40 AM
#12
Rookie
Join Date: Nov 2010
Location: MD
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
I have a question regarding my fogs also. I installed HIDs in my low beams and my fog lights. They worked fine for a few days. The fog lights now won't come on at all. The low beams still work fine, but I am not sure why the fog lights are not working. Any help would be appreciated.
03-23-11, 07:18 PM
#13
Driver
Join Date: Oct 2005
Location: IL
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
03-23-11, 09:15 PM
#14
I have a question regarding my fogs also. I installed HIDs in my low beams and my fog lights. They worked fine for a few days. The fog lights now won't come on at all. The low beams still work fine, but I am not sure why the fog lights are not working. Any help would be appreciated.
anyone here try this: http://www.meguiarsdirect.com/detail/MEG%20G3000
Thread
Thread Starter
Forum
Replies
Last Post
