diamond92

Will the 16 inch rims from a 99 GS300 fit my 92 es300? I would
also like to know if they do fit,will I need spacers?...
here are the specs. of the rims;
1999 GS300
Specs: 16X7.5 +50 mm offset
Centerbore for the gs is 60.1mm

Choas

Maybe a 5mm in the rear but it can be easily done

diamond92

but the lug pattern is the same choas?

Lazy

iTrader: (2)

Should fit fine. Don't think you would need a spacer for it.

diamond92

sweet ,I think I might buy these bad boys just for a little upgrade.

imissmys14

get better rims with a better offset like 350zs g35s or even is300 im sure u can find those for less than $500 with tires.

Choas

The bolt pattern for any Scion, Toyota, Lexus is the same with a few exceptions such as the ls460/470

rob96826

you will need spacers for the rear.

diamond92

how about these rims....Chrome Saleen replica rims, never used, still in wrapping and box, (2) 18x9 and (2) 18x10. Has a 5x4.5" (5x114.3mm) bolt patern and a back spacing that will fit any Mustang from 1994 to 2004.

Slooooooow

iTrader: (1)

Way too wide. Not a Mustang or rear-driver.

diamond92

a guy can dream...lol ,I'm going to buy these,
but some say I need a spacer ,and some say I don't.....
1999 GS300
Specs: 16X7.5 +50 mm offset
Centerbore for the gs is 60.1mm

Lazy

iTrader: (2)

I agree with him.. 500 will get you something better.

Choas

The mustang rims are too wide try to stay at or below 8" wide with a 30mm to 45mm offset to be safe. Those gs rims are to small not even worth getting you should really stick with 17" or 18".

Bdub215

iTrader: (1)

i have a question i have a set of Mk3 Supra wheels that i'd like to put

on my car. seeing as how they're free and all, would these be good for the ES?

Matador

Please dont put sawblades on the ES300...your stock rims look WAAAAAY better.