ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

ES330 Alignment question

Thread Tools
 
Search this Thread
 
Old 03-16-08, 09:38 AM
  #1  
ES3302005
Driver School Candidate
Thread Starter
 
ES3302005's Avatar
 
Join Date: Mar 2008
Location: OR
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default ES330 Alignment question

Hi All,

More questions about my 05 ES330. I purchased it used with 45,000 mile recently. Bought new tires at Firestone store and they did the complementary alignment check. It was okay for most specs, borderline on a couple and barely out of spec on one the Right Rear Camber. Firestone states it should be between -0.6degrees and -2.1degrees. My wheel comes in at -0.5 degree, just barely out of spec.

While at the Lexus dealer getting a few little warranty issues fixed I mentioned this to the service rep and he shakes his head and sez: If you aren't using a Lexus alignment rack you are bound to get these screwy readings, that if my RR wheel was that far out I would trashing RR tire within 5000 miles. The tires I took off were warn but evenly with no apparent alignment wear. He made no effort to try to get me to do an alignment or even quote me a price, so I am left wondering.

I just wanted some feedback that maybe I should get this checked or aligned at the Dealer, elsewhere or just forget it, the car seems to handle well on highway, no shakes or drift. The Firestone folks seemed to think that this alignment issue could not be adjust out, that it probably indicated a bent shock or A Arm.

Thanks all
Michael

BTW I put on Bridgestone Tourenza Serenity 215/55-17 V rated all seasons, not a performance tire, but handles very nice and is soooooooo quiet. I only have 1000 miles on em, but so far a nice tire, and good in the rain.
Old 03-16-08, 09:42 AM
  #2  
powerwave
Lead Lap
 
powerwave's Avatar
 
Join Date: Jun 2007
Location: DC metro
Posts: 545
Likes: 0
Received 0 Likes on 0 Posts
Default

lexus doesn't make alignment racks, lol

anyone using the current series hunter equipment can give you accurate readings. 0.1 off isn't horrible but if you're concerned you could probably get your hands on a camber bolt.
Old 03-16-08, 12:59 PM
  #3  
JSM1284
Lexus Test Driver
 
JSM1284's Avatar
 
Join Date: Sep 2007
Location: Illinois
Posts: 1,245
Likes: 0
Received 9 Likes on 7 Posts
Default

Your service rep is full of **** and should be fired.
Old 03-16-08, 03:55 PM
  #4  
ES3302005
Driver School Candidate
Thread Starter
 
ES3302005's Avatar
 
Join Date: Mar 2008
Location: OR
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

I pretty much figured he was blowing smoke up my backside. I was suprised that he didn't pitch an alignment from them while he was poo pooing a alignment done anywhere else. Between this and the quote of $600 plus to replace brake bads and turn rotors I suspect I will be making very few visits to this dealer after the warranty period expires.

I had other questions about the car that the dealer didn't answer to my satisfaction but I will post those in a new thread.

thanks all
Michael
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
YWW
RX - 2nd Gen (2004-2009)
4
07-31-14 11:53 AM
saewoo
IS - 3rd Gen (2014-present)
8
06-16-14 03:59 PM
Soap
IS - 2nd Gen (2006-2013)
6
01-09-12 10:30 AM
imaputz
IS - 2nd Gen (2006-2013)
10
06-28-06 10:30 PM
Gs400TRD
Maintenance
3
04-07-02 02:12 PM



Quick Reply: ES330 Alignment question



All times are GMT -7. The time now is 10:08 PM.