larryr

Help!
I have a code 52 on a 92 lexus es 300. I read on the board that the knock sensors were under the intake, however after removing the intake they are not there. I know this is dumb but I cant see them anywhere there or on the side of the block. The 94 camry info also shows them under the intake.

What am I missing?

TIA'
Larry

Pheonix

Upper Intake Air Chamber



Intake Manifold







Tada!
See the two wires in the middle of the screen? One screws into each bank.


95% of the time the wiring is damaged. Knock sensors are a piezeo on a stick. Not really much for them to go bad.

larryr

Thanks a lot . Sounds like maybe just replace the wires and I will be ok.

1993ES300x

Pheonix.. looks like you're rebuilding the whole engine. or are you just replacing the HeadGasket??.. how long did it took you??

Pheonix

Pictures from replacing the head gaskets, porting & polishing the heads/exhaust manifold/intake manifold/UIAC, deleting EGR, modding ACIS, installing the SMT-6, intake manifold spacer. God knows what else, I can't remember. Last September / October. Took a couple of weeks to do everything, but parts failure after parts failure kept it from running much through January.

Two timing belts, screwed cam timing directions,dieing fuel pump in January (I think). It sucked *** took forever. It was soooo worth it tho LoL!

larryr

Replaced the wiring, which was in bad shape, but still have a code 52. Trying to determine which sensor is identified with a code 52. any one here know?

Tia,
Larry

Pheonix

Left bank, even bank, front bank.