ES - 6th Gen (2013-2018) Discussion topics related to 2013+ ES models

Warming up a cold engine?

Thread Tools
 
Search this Thread
 
Old 02-11-16, 02:29 PM
  #31  
lesz
Lead Lap
 
lesz's Avatar
 
Join Date: Aug 2013
Location: Illinois
Posts: 4,279
Received 1,010 Likes on 691 Posts
Default

Originally Posted by bc6152
Even with the '66 Corvette where you have to set the choke before starting and "goose" it to bring down the idle...
Boy, that brings back some memories. It made me try to recall when was the last time that I bought a vehicle without fuel injection. I think that the last car that I bought with a carburetor was probably a 1983 Trans Am (which was, more than any vehicle I've owned, a piece of junk, and it was the vehicle that made me decide to stop buying GM vehicles). I also recall that, when I started to buy vehicles with fuel injection, it took a while to break the habit of setting the choke before starting the vehicle.
Old 02-11-16, 02:47 PM
  #32  
Mike728
Lead Lap
 
Mike728's Avatar
 
Join Date: Mar 2013
Location: IL
Posts: 4,709
Received 613 Likes on 461 Posts
Default

I miss the days of sticking a screw driver down to carb to start it in the winter. Oh wait, no I don't!
Old 02-11-16, 03:34 PM
  #33  
LexBob2
Lexus Champion
 
LexBob2's Avatar
 
Join Date: Aug 2006
Location: Illinois
Posts: 10,987
Received 137 Likes on 111 Posts
Default

Originally Posted by Mike728
I miss the days of sticking a screw driver down to carb to start it in the winter. Oh wait, no I don't!
You might want to spray some starter fluid in there too.
Old 02-13-16, 08:43 AM
  #34  
Maikerusan
Advanced
 
Maikerusan's Avatar
 
Join Date: Mar 2015
Location: Ontario
Posts: 565
Received 48 Likes on 35 Posts
Default

Originally Posted by isfdude
I have tested a few engines with this, If the weather is below 30 degrees and you just start and go you will cause damage to your transmission and the fluid has to reach a certain temp to have The optimum protection that it offers. Also notice that your engine is a little louder on really cold days... This is because oil hasn't fully coated certain parts yet until it thins out. it won't be good to put it under any load other than idling. When parts warm up they expand so if this is don't too fast I don't see this being good for your engine gaskets. Just like your body... You can't just start doing things without warming up unless you will end up doing permanent damage eventually.
Sorry, have to disagree with this. The analogy between a car engine and the human body is not realistic science.

Having lived in places where temps go to -40, I have never once had a transmission failure or any kind of issue . When temps are below 0F, I might let the car idle for a couple of minutes, but that's just really to allow some heat to come on and ensure the windows don't fog/ice up immediately upon driving. It has more do do with comfort inside the car than any kind of engine issue, etc.
Old 02-13-16, 06:52 PM
  #35  
mrBillFL
Lead Lap
 
mrBillFL's Avatar
 
Join Date: Dec 2012
Location: FL
Posts: 404
Received 7 Likes on 6 Posts
Default

if you ever watched an oil temperature gauge on a engine, you know it takes a good 10-15 min for the oil to get to operating temps. But with today's synthetic you don't need hot oil to run.

the temp gauge on 99% of cars is water temp.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
swaangin
IS - 3rd Gen (2014-present)
2
04-10-19 09:57 AM
edablx13
ES - 6th Gen (2013-2018)
4
03-02-14 06:44 PM
shreddog
IS - 3rd Gen (2014-present)
12
01-08-14 10:04 AM
RD400H
Hybrid Technology
6
05-21-08 12:20 PM



Quick Reply: Warming up a cold engine?



All times are GMT -7. The time now is 05:39 AM.