Front bumper replacement ES350 2008
#1
10th Gear
Thread Starter
Front bumper replacement ES350 2008
Someone crunched my front passenger side and left without a note, so now I need a new cover. A body shop quoted me $850 assuming no damage to under parts. Since I can get a pre-painted cover for $350 there's $500 bucks in it as a DIY.
Is this a doable DIY for an average skilled guy?
What other parts are likely to be needed other than a new cover? Like clips, sealing strips, etc. I would like to have everything on hand once I start.
Does the grill stay on the car or come off with the cover?
I found a few basic instructions but would prefer something more detailed if available. Any suggestions?
Thanks!
Is this a doable DIY for an average skilled guy?
What other parts are likely to be needed other than a new cover? Like clips, sealing strips, etc. I would like to have everything on hand once I start.
Does the grill stay on the car or come off with the cover?
I found a few basic instructions but would prefer something more detailed if available. Any suggestions?
Thanks!
#4
Driver School Candidate
Join Date: May 2016
Location: Ohio
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
DIY instructions?
I have to replace the front bumper cover on our 2007 ES350 also. I have not been able to find DIY instructions to do this. If someone from the forum could share the remove and replace procedure, I would appreciate it.
Thanks,
Rick
Thanks,
Rick
Last edited by Rick2007; 05-30-16 at 07:01 AM.
#5
Driver School Candidate
ALLDATAdiy.com - 2007 Lexus ES 350 V6-3.5L (2GR-FE) - Removal and Replacement.pdf
Here's a PDF of the remove and replacment for your ES350.
Here's a PDF of the remove and replacment for your ES350.
Thread
Thread Starter
Forum
Replies
Last Post
rs0114
RX - 2nd Gen (2004-2009)
6
03-03-23 08:47 AM
awol707
IS - 2nd Gen (2006-2013)
4
01-17-08 08:23 AM