ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

2001 es300- Trunk relase doesn't work.

Thread Tools
 
Search this Thread
 
Old 05-27-15, 12:54 PM
  #1  
tommy329
Driver School Candidate
Thread Starter
 
tommy329's Avatar
 
Join Date: Feb 2011
Location: New Jersey
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default 2001 es300- Trunk relase doesn't work.

Hey folks. 2001 es 300. When I push the trunk release button on the inside of the car it doesn't work and makes a clicking sound twice. The sound comes from some where near the radio. The valet button in the glove box is in the correct position. If I engage the valet button the clicking sound stops but the trunk obviously doesn't open. ANY HELP WOULD BE APPRECIATED! I did notice other threads with the same issue but with no resolve.
Old 05-27-15, 01:31 PM
  #2  
Megafast13
Instructor
 
Megafast13's Avatar
 
Join Date: Aug 2008
Location: Ohio
Posts: 1,178
Received 6 Likes on 6 Posts
Default

Double check the fuse for the mechanism. If it looks good it could be a more serious wiring/electrical issue.

https://www.clublexus.com/forums/es3...-pop-open.html
Old 05-27-15, 07:00 PM
  #3  
speedkar9
Lexus Champion
 
speedkar9's Avatar
 
Join Date: Aug 2012
Location: Toronto, Canada
Posts: 1,729
Likes: 0
Received 118 Likes on 89 Posts
Default

Does it work with the remote?
Old 05-28-15, 06:51 AM
  #4  
PFB
Lexus Champion
 
PFB's Avatar
 
Join Date: Oct 2009
Location: Montreal, Canada
Posts: 1,841
Received 44 Likes on 39 Posts
Default

Sometimes the electrical wire that goes to the latch in the trunk breaks at the trunk hinge. This is where it's routed.

Its caused by opening and closing the trunk thousands of times over the years.

Use a VOM meter to check for power at the latch. If all fuses are Ok, this is where I'll check next.

Also, does your fuel door open when you press its release button on the dash?

Phil

Last edited by PFB; 05-28-15 at 04:40 PM.
Old 06-01-15, 03:40 AM
  #5  
tommy329
Driver School Candidate
Thread Starter
 
tommy329's Avatar
 
Join Date: Feb 2011
Location: New Jersey
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the replies. Unfortunately I do not have a remote for this car. The fuel tanks release door button is working fine. Is there a fuse specifically for the trunk release???? I can not find a fuse panel inside the car. The only fuse box I found is under the hood and there was no fuse for trunk release. Is there a fuse box inside the car that I am missing? I will also check wiring at trunk latch. ONCE AGAIN, THANKS FOR THEH REPLIES!!!

TOMMY329

Last edited by tommy329; 06-01-15 at 03:43 AM.
Old 06-01-15, 06:06 AM
  #6  
PFB
Lexus Champion
 
PFB's Avatar
 
Join Date: Oct 2009
Location: Montreal, Canada
Posts: 1,841
Received 44 Likes on 39 Posts
Default

There is a fuse box behind the coin holder inside the car. You'll need to pull out the coin holder to access it. Requires a bit of force and squeezing the sides to pull it out. The owners manual explains how to remove the coin holder in detail.

However, since your Fuel door release works, I doubt its a fuse problem The same fuse serves both the trunk and fuel door release, but check anyways.

As I suggested in my earlier reply, check the wire where it routes at the trunk hinge. That's where they usually break

And of course check for voltage at the latch, as well as the trunk lock-out switch in the glove compartment.


Phil

Last edited by PFB; 06-01-15 at 03:13 PM.
Old 06-01-15, 11:04 PM
  #7  
Qwerty321
Rookie
 
Qwerty321's Avatar
 
Join Date: Jan 2015
Location: X
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default

This is a bit of a long shot but my ES300 has a trunk open canceler thing in the glove box. Like, if you push that button, then none of the other buttons or the remote open the trunk. It's right next to the cd changer.

Maybe you accidentally pushed that button.
Old 06-08-15, 06:54 AM
  #8  
tommy329
Driver School Candidate
Thread Starter
 
tommy329's Avatar
 
Join Date: Feb 2011
Location: New Jersey
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default Trunk release does not work

I have made sure the trunk release inside glove box is in the correct position. I have located fuse panel by removing coin box. There is no fuse labeled trunk release or fuel door release. I enclosed a photo of the label. Am I missing something? Any help would be appreciated. I checked the wire at the latch and it seemed fine. Not sure how to check for voltage but I attached a photo of my diagnostic tools. Again, thanks for any help
Attached Thumbnails 2001 es300- Trunk relase doesn't work.-fuse-lable.jpg   2001 es300- Trunk relase doesn't work.-testing-equipment.jpg  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chancho
ES - 1st to 4th Gen (1990-2006)
3
09-26-18 07:30 AM
velani
ES - 1st to 4th Gen (1990-2006)
1
01-22-17 05:56 PM
tbmobiledj
ES - 1st to 4th Gen (1990-2006)
2
10-29-14 09:37 PM
divilish
ES - 5th Gen (2007-2012)
2
04-25-14 10:34 AM
Leets
ES - 1st to 4th Gen (1990-2006)
6
04-13-11 07:31 AM



Quick Reply: 2001 es300- Trunk relase doesn't work.



All times are GMT -7. The time now is 12:42 PM.