94 es 300 Oxygen sensor wiring
05-17-15, 06:57 PM
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2015
Location: nj
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
94 es 300 Oxygen sensor wiring
i need info on the wiring colors on heated oxygen sensor bank 1 sensor 1. I have to check as I keep getting a code P0135 after replacing sensor.
05-18-15, 01:08 PM
#3
Driver School Candidate
Thread Starter
Join Date: Apr 2015
Location: nj
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
edstofegajr
Yes I changed the right one, however I just tested the new sensor and it is bad. I swapped the front sensor to the back( by firewall) as this one is more difficult to work on and installed the bad one in front where I can easily replace it. I am sure that I will now get a new code P0150.
Thanks for the reply, I have received a lot of helpful info from this forum. I have read all the posts about oxygen sensors and have found a link for the factory service manual which I was following to troubleshoot this problem.
Thanks for the reply, I have received a lot of helpful info from this forum. I have read all the posts about oxygen sensors and have found a link for the factory service manual which I was following to troubleshoot this problem.
Thread
Thread Starter
Forum
Replies
Last Post
