Need help identifying part on 99 ES300
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2013
Location: OR
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Need help identifying part on 99 ES300
Does anyone know what these sensors are? They're off of 99 ES300. One of them was broke when I tried to removed it.
Pic taken from the front. You can see 2 small tubes running to one of the sensor. This is the front one isn't broken, you can see the orange plug toward the rear on the right side that is broke.
Rear sensor that is broken and need replacement.
Pic taken from the front. You can see 2 small tubes running to one of the sensor. This is the front one isn't broken, you can see the orange plug toward the rear on the right side that is broke.
Rear sensor that is broken and need replacement.
Last edited by is503; 07-20-14 at 06:55 PM.
#2
Lexus Champion
It's a vacuum switching valve, best to seek one out at an auto wreckers new they are $130+. Both are the same BTW.
#3
Driver School Candidate
Join Date: Jul 2014
Location: Washington
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
#6
Driver School Candidate
Thread Starter
Join Date: Dec 2013
Location: OR
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Just got it from ebay for $21shipped.
thanks guy. I was in the process of changing out #3 and #4 coil, and broke the the vaccum switch trying to remove the hose. I didn't have to remove the intake manifold to swap out the rear coil. I might just replace all the spark plugs this weekend too. I should have the car back together this weekend.
thanks guy. I was in the process of changing out #3 and #4 coil, and broke the the vaccum switch trying to remove the hose. I didn't have to remove the intake manifold to swap out the rear coil. I might just replace all the spark plugs this weekend too. I should have the car back together this weekend.
Thread
Thread Starter
Forum
Replies
Last Post
saggy007
ES - 1st to 4th Gen (1990-2006)
24
03-20-20 11:48 PM
djdan017
ES - 1st to 4th Gen (1990-2006)
1
01-28-11 04:53 PM