ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

1998 es300 emission system parts

Thread Tools
 
Search this Thread
 
Old 08-13-13, 12:12 PM
  #1  
davidp1561
Driver School Candidate
Thread Starter
 
davidp1561's Avatar
 
Join Date: Aug 2013
Location: ok
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default 1998 es300 emission system parts

I need part numbers for the following:

EGR Valve
Vapor Pressure Sensor
Vacuum Surge Tank
VSV for EGR
VSV for EVAP
VCV

am having some trouble with the car and had it checked at the dealer and was told there was a problem with the emission system and it was the charcoal canister. Have replaced that and the car ran good for about a week or so and now its back to the same issue which is that after it warms up it has a rough idle and want to die at stop lites etc. Any help will be great. Thanks
Old 08-13-13, 12:20 PM
  #2  
Hayk
Lead Lap
iTrader: (1)
 
Hayk's Avatar
 
Join Date: Feb 2009
Location: NJ
Posts: 4,101
Received 291 Likes on 230 Posts
Default

Originally Posted by davidp1561
I need part numbers for the following:

EGR Valve
Vapor Pressure Sensor
Vacuum Surge Tank
VSV for EGR
VSV for EVAP
VCV

am having some trouble with the car and had it checked at the dealer and was told there was a problem with the emission system and it was the charcoal canister. Have replaced that and the car ran good for about a week or so and now its back to the same issue which is that after it warms up it has a rough idle and want to die at stop lites etc. Any help will be great. Thanks
Try cleaning your IACV, it worked wonders for my car

Old 08-13-13, 01:14 PM
  #3  
davidp1561
Driver School Candidate
Thread Starter
 
davidp1561's Avatar
 
Join Date: Aug 2013
Location: ok
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

thank you sir! will give that a try after work
Old 08-13-13, 01:47 PM
  #4  
DGIKULJOT
Rookie
 
DGIKULJOT's Avatar
 
Join Date: Aug 2012
Location: CA
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by davidp1561
thank you sir! will give that a try after work
Just so you know, if you can try to take the IAVC valve off and clean it. You will have to remove the throttle body. Through that whole you cant clean it well as if you took it off,
Good Luck
Old 08-15-13, 06:12 AM
  #5  
davidp1561
Driver School Candidate
Thread Starter
 
davidp1561's Avatar
 
Join Date: Aug 2013
Location: ok
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default 1998 es300

This issue is driving me crazy. Been investigating the issues with the emission system. the problem is more pronounced when the fuel level is below 1/4 of a tank. what would this indicate?
Old 08-15-13, 09:36 AM
  #6  
Hayk
Lead Lap
iTrader: (1)
 
Hayk's Avatar
 
Join Date: Feb 2009
Location: NJ
Posts: 4,101
Received 291 Likes on 230 Posts
Default

Does the issue go away if you rev the engine? Another culprit could be a vacuum leak. An engine produces the most vacuum (suction) at idle speeds and it goes away at higher speeds. So if you have a leak (unmetered air), it would be the worst at idle.
Old 08-15-13, 11:37 AM
  #7  
PFB
Lexus Champion
 
PFB's Avatar
 
Join Date: Oct 2009
Location: Montreal, Canada
Posts: 1,841
Received 44 Likes on 39 Posts
Default

A smoke test will reveal possible emission system problems and vacuum leaks

Phil
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BHKH
LS - 1st and 2nd Gen (1990-2000)
5
08-03-19 08:31 PM
pon-alex
ES - 1st to 4th Gen (1990-2006)
46
08-24-15 07:49 PM
PFB
ES - 1st to 4th Gen (1990-2006)
20
10-29-14 05:35 PM
DGIKULJOT
ES - 1st to 4th Gen (1990-2006)
4
09-23-12 07:22 PM
Inabj2
Maintenance
1
06-04-05 04:51 AM



Quick Reply: 1998 es300 emission system parts



All times are GMT -7. The time now is 03:46 AM.