Replacing headgasket due to overheating on 93 ES300
The following users liked this post:
fruckinoff (10-24-22)
#2
Lexus Fanatic
Thanks for all the pics! The engine internals look very clean, very nice. You didn't mention using a service bolt on the exhaust camshafts, did you install one before removing the cams?
#4
Lexus Fanatic
#6
Lexus Fanatic
Service manual is for a 1993 3VZ-FE.
Trending Topics
#9
Rookie
Thread Starter
Here's a picture comparing the new headgasket next to the old one.
[IMG]http://i1181.photobucket.co2327Ffp3nu32863542WSNRCG3462669335nu0mr
[IMG]http://i1181.photobucket.co2327Ffp3nu32863542WSNRCG3462669335nu0mr
Last edited by PolishJoe; 01-03-13 at 01:12 PM.
The following users liked this post:
fruckinoff (10-24-22)
#14
Driver School Candidate
Join Date: Aug 2013
Location: IA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
FSM download to help with replacing bad Headgasket
Hey Guys
just got a 1993 ES from My dad. and the rear headgasket is blown I am thinking if I am going to have to drop the SubFrame I might as well do both of them and the belt and any other little fixxes that I can while I have it down. and I am wondering if anyone has a link for a FSM for it. the car itself is in too nice a shape to not fix.
Thanks in advance for any advice or help
just got a 1993 ES from My dad. and the rear headgasket is blown I am thinking if I am going to have to drop the SubFrame I might as well do both of them and the belt and any other little fixxes that I can while I have it down. and I am wondering if anyone has a link for a FSM for it. the car itself is in too nice a shape to not fix.
Thanks in advance for any advice or help
Thread
Thread Starter
Forum
Replies
Last Post
Dtwillis5
ES - 1st to 4th Gen (1990-2006)
3
03-30-14 12:29 PM
bwhsh8r
ES - 1st to 4th Gen (1990-2006)
9
12-19-07 06:54 AM