Third brake light bulb out
#2
Lexus Test Driver
CENTER STOP LAMP ASSEMBLY
REPLACEMENT
REMOVE CENTER STOP LAMP ASSEMBLY
Pull out the center stop light assembly shown in the illustration.
Disconnect the connector.
REPLACEMENT
REMOVE CENTER STOP LAMP ASSEMBLY
Pull out the center stop light assembly shown in the illustration.
Disconnect the connector.
#3
#7
Driver School Candidate
Join Date: Jan 2012
Location: CA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
I just noticed my license plate bulbs went out. Those don't look easy to change out. 1 on each side.
Trending Topics
#8
Driver School Candidate
Join Date: Feb 2012
Location: WA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Inside job
I figured it out with the help of some of the other postings. From inside the car, lift up on the two corners toward the front of the car, one at a time. You have to lift hard, I used my hands but you may need to pry it up. Once you feel it snap on both sides, you pull the housing forward. To reinstall, push back and then down until it spans in.
#9
Lead Lap
2009 ES350 3rd brake light
I figured it out with the help of some of the other postings. From inside the car, lift up on the two corners toward the front of the car, one at a time. You have to lift hard, I used my hands but you may need to pry it up. Once you feel it snap on both sides, you pull the housing forward. To reinstall, push back and then down until it spans in.
Thread
Thread Starter
Forum
Replies
Last Post